Air!Squitter and the FLARM receiver

[ct1aic]

I'm using a jetvision Air!Squitter for some time, receiving both ADS-B and FLARM frequencies and feeding several sites, including FR24.

In local Air!Squitter browser and in PlanePlotter, I can see the FLARM planes I'm detecting, but not in FlightRadar24 and I can see FLARM detected plains in other locations. Why? What did I missed in my configuration?

Best regards.
Rui

[Oblivian]

The feeder app only sends adsb.

flarm is supplied by another provider

[Oblivian]

To expand.

It is OGN network.



You can add an OGN feeder

http://wiki.glidernet.org/ogn-receiver-hardware-and-software#receiver-software-installation

[ct1aic]

My Air!Squitter is sending the FLARM receiving plains to aprs.glidernet.org, I see the detected info at several OGN sites (http://www.glidertracker.org/, http://live.glidernet.org/), but not at FlightRadar24.

[F-EGLF1]

My Air!Squitter is sending the FLARM receiving plains to aprs.glidernet.org, I see the detected info at several OGN sites (http://www.glidertracker.org/, http://live.glidernet.org/), but not at FlightRadar24.

OGN will only pass data to FR24 if the glider is registered in the OGN database and has the correct flags set, only a minority of the U.K. ones are correctly registered, I don’t know about other countries. (Also FR24 will only show them ‘live’ and not on playback as OGN don’t allow the data to be stored for more than 24 hours due to the concerns of a very small number of German pilots who threatened legal action using the draconian privacy laws they have, therefore inconveniencing the rest of the world!)

[bortek]

Hi

Can anyone explain why my aircraft is nowt shown on the FR24? I have registered in in OGN DDB , (se pic) but still nothing on the map. Does it take few days before FR24 syncs in devices DV from OGN?

I have set all the flags to allow data and send device ID etc. I can see the proper geristrationID on all OGN maps but not on FR24.

OGN.JPG