Announcement

Collapse
No announcement yet.

PROBLEM Aircraft Tracked 1 - Aircraft Uploaded: 0

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by wiedehopf View Post
    FC0012 Chip

    not suitable for 1090 MHz

    get a new SDR with an RT820T chipset.
    for example FA prostick+
    You are right, It is a DVB-T Stick with RTL2832U + FC0012 Chip. I mean this one was recommended on the website for a while.
    But perhaps i am wrong.

    Is this the right one for a Raspberry Pi?
    https://www.amazon.de/NooElec-NESDR-...0291694&sr=8-1

    (It is the Version 4 and not the linked Version 2 from the Website.)

    Or this one:
    https://www.amazon.de/NooElec-kosten...09U7WZCA&psc=1

    Thank you very much for your help.


    Comment


    • #17
      R820T2 is pretty much the same.

      The one with metallic housing is much nicer.
      If you're only getting it for ADS-B consider the FA ProStick+.
      Otherwise those are good choices.

      https://github.com/wiedehopf/adsb-wi...-shopping-list

      Comment


      • #18
        Realy, thank you very much for your support.

        I think i will buy the following:
        https://www.amazon.de/NooElec-kosten...09U7WZCA&psc=1

        Of course the one with the metallic housing is nicer, i agree. But i think the raspberry is hidden, so i think the one from my link is enough.
        Important is, that it will work. And if you say it will also work, that is ok or me.

        Thank you again. I will order that one now.

        I hope i understand that correct from your answer.

        Comment

        Working...
        X