Announcement

Collapse
No announcement yet.

System has not been booted with systemd as init system (PID 1). Can't operate.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • System has not been booted with systemd as init system (PID 1). Can't operate.

    My receiver has worked fine for months until recently. The following appears when I run fr24feed-status:
    Code:
    System has not been booted with systemd as init system (PID 1). Can't operate.
    Failed to connect to bus: Host is down
    [FAIL] FR24 Feeder/Decoder Process ... failed!
    Additionally, IP:8754 is not displaying. Here is some information about my setup.

    Hardware/Software resources:
    • Raspbian Buster Version 10
    • RPI4 4GB
    • Jetvision DVB-T (No. 53199; R820T2 & SDR)
    • SanDisk 32GB microSD (it's just a normal microSD)
    • More details about my installation and setup can be found on my forum post from march: https://forum.flightradar24.com/foru...er-down-failed
    Please let me know what I should do to fix this. Thanks for the help.

  • #2
    Are you running all commands with SUDO....

    sudo service fr24feed stop
    - service is depreciated but may have been used previously?)
    sudo systemctl stop fr24feed

    sudo systemctl start fr24feed

    And reboot.
    Last edited by Oblivian; 2020-07-07, 03:41.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

    Comment


    • #3
      Further with my limited basic knowledge.. Have you per chance been installing other stuff on it.

      Like Docker...
      Posts not to be taken as official support representation - Just a helpful uploader who tinkers

      Comment


      • #4
        Originally posted by Oblivian View Post
        Further with my limited basic knowledge.. Have you per chance been installing other stuff on it.

        Like Docker...
        Yes. I installed a minecraft server on my pi a while ago. There's also some other small files, but nothing serious.

        Comment


        • #5
          sudo systemctl status fr24feed

          If that command doesn't work, start with a fresh image.
          https://github.com/wiedehopf/adsb-wi...ADS-B-receiver

          Comment

          Working...
          X