My feeder has been doing this since the failed auto upgrade. - Just rebuilt the RPi - found i couldn't do the bash get without changing my first DNS to 8.8.4.4 and only then would it download the software but changing the DNS to 8.8.4.4 permanently does NOT fix the issue of the feed not connecting.
SO its not fixed guys!
Announcement
Collapse
No announcement yet.
My radar gone offline
Collapse
X
-
My FR24 and FA are now not working correctly and I can't keep either of them running. FR24 told me this AM that a fix was sent to receivers and everyone received it and the problem has been resolved. They also said that if your receiver is not working properly it must be "your" equipment...
Leave a comment:
-
I am having similar problems with two of my FR24 feeders and now a FA feeder.
Leave a comment:
-
I am having the same or similar problem(s) now. Was there a resolution?Attached Files
Leave a comment:
-
Originally posted by LN-MOW View PostOne of my two feeders keep dropping the feed and has done so for the last couple of weeks. After a reboot, it reconnects and all is normal for a while.
Seems to be a tar1090 issue ..
tar1090 is only a webinterface, not a decoder.
There is no way for it to interfere with feeding.
- 1 like
Leave a comment:
-
One of my two feeders keep dropping the feed and has done so for the last couple of weeks. After a reboot, it reconnects and all is normal for a while.
Seems to be a tar1090 issue ..
Leave a comment:
-
Originally posted by Oblivian View Post
It was a software update that caused the issue.
Leave a comment:
-
-
Leave a comment:
-
Originally posted by Oblivian View Postsupport@fr24.com - just like the info pack when receiver is sent.
They own and manage the box remotely. Not through forum. Management has disabled it by that message.
Leave a comment:
-
support@fr24.com - just like the info pack when receiver is sent.
They own and manage the box remotely. Not through forum. Management has disabled it by that message.
Leave a comment:
-
Originally posted by mattdav View Post
I assume you've tried rebooting? Does it work locally?
What do you get if you enter the code below?
Code:fr24feed-status
FR24 CONNECTION STATUS:
ADS-B:
ModeS: disabled
I do not enter the configuration: (Sorry, but config has been disabled for this device!)
(Google translated)
Leave a comment:
-
Ta for the update and thanks again to Oblivion for putting up a perma-thread on the subject.Last edited by HikokiOtaku; 2020-08-30, 15:21.
Leave a comment:
Leave a comment: