Announcement

Collapse
No announcement yet.

Troubles with installation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wiedehopf
    replied
    I'd install fr24feed on the existing working raspios you have running, this describes how:
    https://github.com/wiedehopf/adsb-wi...ADS-B-receiver

    There is also FR24 install script, but it's unreliable and offers not proper logging to the journal.

    Leave a comment:


  • Philipr4
    replied
    Please excuse me if I am asking something obvious. I am brand new here.
    I have a RPi 4B. It is already running raspios-buster-armhf-full. In addition I have a MH5 3.5" touch screen. By itself, everything runs fine. When I put the FR24 MicroSD in, I can see everything is there using Putty, but the screen doesn't work.

    How can I integrate the FR-24 and the screen to work so that everything is uniform?

    I really want to get this going before my 30 days expires.

    Thanks for any help!

    Leave a comment:


  • EHRD430
    replied
    Originally posted by wiedehopf View Post
    https://github.com/wiedehopf/adsb-wi...ADS-B-receiver

    Make sure to configure location for readsb or dump1090 (whatever you use) for the graphs to work.
    I forgot the location configuration. Thanks

    Leave a comment:


  • wiedehopf
    replied
    https://github.com/wiedehopf/adsb-wi...ADS-B-receiver

    Make sure to configure location for readsb or dump1090 (whatever you use) for the graphs to work.

    Leave a comment:


  • EHRD430
    replied
    Hello

    As you all can see i on 2020-04-30 thats its all working.
    Due to a problem with the raspberry i need to do a fresh install.
    It's working but not as it was.

    So i install the graphs1090 again.
    But thats not working 100%.
    I missed the range filled in.

    Do you have a solution wiedehopf


    graphs1090.jpg

    Leave a comment:


  • EHRD430
    replied
    Thanks for all here.
    It's working for days now.

    Leave a comment:


  • wiedehopf
    replied
    The map will only show what you receive.

    check https://www.flightradar24.com/account/data-sharing

    Should show you feeding now as well if you see something on the map.

    For some statistics: https://github.com/wiedehopf/graphs1090#graphs1090

    Leave a comment:


  • EHRD430
    replied
    Originally posted by wiedehopf View Post
    you don't just type in fr24feed ... it's already running as a service.


    The default map isn't that pretty, if you want something fancier, install these two
    https://github.com/wiedehopf/adsb-sc...ion-for-readsb
    https://github.com/wiedehopf/tar1090#tar1090
    Well thats great those two maps.
    But can you tell me how long the plane is on my map?
    Because i see them moving on my map and after a while he's off the radar.
    Is that due to the antenna here at my home?

    Leave a comment:


  • EHRD430
    replied
    Originally posted by wiedehopf View Post
    you don't just type in fr24feed ... it's already running as a service.

    have you checked http://IP/dump1090 ?
    with IP being the IP address of your device?

    The default map isn't that pretty, if you want something fancier, install these two
    https://github.com/wiedehopf/adsb-sc...ion-for-readsb
    https://github.com/wiedehopf/tar1090#tar1090
    i check http://IP/dump1090 and i get a map of the world in my screen.

    now i'm busy with installing the two urls you post

    Leave a comment:


  • wiedehopf
    replied
    you don't just type in fr24feed ... it's already running as a service.

    have you checked http://IP/dump1090 ?
    with IP being the IP address of your device?

    The default map isn't that pretty, if you want something fancier, install these two
    https://github.com/wiedehopf/adsb-sc...ion-for-readsb
    https://github.com/wiedehopf/tar1090#tar1090

    Leave a comment:


  • EHRD430
    replied
    Originally posted by wiedehopf View Post
    So do a reboot ... check if you're receiving anything.

    Not sure which dump1090 you were running ...
    I did a reboot and type in putty fr24feed.

    Maybe you can check my log file?
    I see in my browser i am connected but in the flightradar browser i can't see my raspberry

    how can i check wich dump1090 i have

    Attached Files

    Leave a comment:


  • wiedehopf
    replied
    So do a reboot ... check if you're receiving anything.

    Not sure which dump1090 you were running ...

    Leave a comment:


  • EHRD430
    replied
    Originally posted by wiedehopf View Post
    No supported RTLSDR devices found.

    You don't have a compatible rtl-sdr SDR receiver connected.

    You can post the output for this command if you like:
    https://github.com/wiedehopf/adsb-wi...l-sdr-receiver

    Hello,

    I just recievd my new rtl2823U stick.
    Now i get this message

    pi@raspberrypi:~ $ sudo bash -c "$(wget -nv -O - https://raw.githubusercontent.c om/wiedehopf/adsb-scripts/master/rtl_test.sh)"
    2020-04-18 16:04:05 URL:https://raw.githubusercontent.com/wi...f/adsb-scripts /master/rtl_test.sh [2136/2136] -> "-" [1]
    -----
    Lost samples in the first 2 seconds after starting the test are common and not a problem!
    Starting 30 second rtl_test, standby!
    -----
    Found 1 device(s):
    0: Generic, RTL2832U, SN: 77771111153705700

    Using device 0: Generic RTL2832U
    Found Rafael Micro R820T tuner
    Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6
    [R82XX] PLL not locked!
    Sampling at 2400000 S/s.

    Info: This tool will continuously read from the device, and report if
    samples get lost. If you observe no further output, everything is fine.

    Reading samples in async mode...
    Allocating 15 zero-copy buffers
    lost at least 8 bytes
    Signal caught, exiting!

    User cancel, exiting...
    Samples per million lost (minimum): 0
    -------
    Test finished!
    More than 2 lost samples per million or other errors probably mean the receiver isn't working correctly.
    Try another power supply before condemning the receiver though!
    -------
    -------
    No undervoltage detected, looking fine!
    If the dongle is not directly plugged into the Raspberry Pi, lack of power/voltage could still be an issue.
    Even without detected undervoltage a better power supply can often improve reception!
    For optimum performance i would recommend the Official Raspberry Pi power supply.

    Leave a comment:


  • abcd567
    replied
    Originally posted by Edelschwein View Post
    on the map are not all planes shown, which are in the list on the right side.
    You cannot see all plane of the list on the map because:
    1. All planes dont send location data. They can be listed, but due to absence of location data, they cannot be plotted on map.
    2. The dump1090 plots a plane only if it receives 3 messages within one miute (I dont remember exact figures, but this will give you an idea of process). If the rception is bad and required number of messages per miute are not received, the plane will not be plotted on map.


    Originally posted by Edelschwein View Post
    What can I do, that the planes are shown on the map?
    For case 1 above, install a datafeeder such as Flightaware or Adsbexchange who calculate plane position by triangulation (MLAT) and feed back this data to your Pi so that planes without position data can also be displayed on map.

    For case 2 above, improve your reception by installing better antenna at higher location away from obstructions, use coax with low attenuation. Adding a Filter and/or LNA may also help.
    Last edited by abcd567; 2020-04-08, 22:54.

    Leave a comment:


  • Edelschwein
    replied
    Dear all,

    I have thr following problem, I have built my own ADS-B Receiver with an RPi 2B, but on the map are not all planes shown, which are in the list on the right side. What can I do, that the planes are shown on the map?


    Thank you in advance

    Edelschwein

    Leave a comment:

Working...
X