Troubles with installation

[abcd567]

20200404_204914.jpg

[abcd567]

I have purchased this directly from AirNav Store for US$9 + US$ 4 shipping. At Amazon.com it had higher shipping cost (US$ 8) plus sales tax (US $ 4). However it took over a month to receive it. AirNav send it by cheapest available method. Amazon's delivery time was few days only.


AirNav-microRadarBox.png

[wiedehopf]

So, you need a receiver, if you have one plugged in currently, it's not working.

This is probably one of the cheapest ways to get started, not sure if it's on your local amazon as well: https://www.amazon.de/dp/B01GNGZAIG

Otherwise, here are some better SDRs for receiving ADS-B: https://github.com/wiedehopf/adsb-wi...ivers--dongles

[EHRD430]

No supported RTLSDR devices found.

You don't have a compatible rtl-sdr SDR receiver connected.

You can post the output for this command if you like:
https://github.com/wiedehopf/adsb-wi...l-sdr-receiver

Hello Wiedehopf,

As you told no support rtlsdr device.
Here is the output.


Lost samples in the first 2 seconds after starting the test are common and not a problem!
Starting 30 second rtl_test, standby!
-----
No supported devices found.
-------
Test finished!
More than 2 lost samples per million or other errors probably mean the receiver isn't working correctly.
Try another power supply before condemning the receiver though!
-------
-------
No undervoltage detected, looking fine!
If the dongle is not directly plugged into the Raspberry Pi, lack of power/voltage could still be an issue.
Even without detected undervoltage a better power supply can often improve reception!
For optimum performance i would recommend the Official Raspberry Pi power supply.

[wiedehopf]

No supported RTLSDR devices found.

You don't have a compatible rtl-sdr SDR receiver connected.

You can post the output for this command if you like:
https://github.com/wiedehopf/adsb-wi...l-sdr-receiver

[EHRD430]

this are the settings at this moment



2.jpg

[EHRD430]

this is via the webbrowser
1.jpg

[EHRD430]

It seems you have installed the fr24feed already, now you need to run it but typing: fr24feed

Try it and then tell us if it works

hello

i type the command fr24feed and get this log in putty.

[main][i]FR24 Feeder/Decoder
[main][i]Version: 1.0.25-1/generic
[main][i]Built on Mar 5 2020 14:41:55 (HEAD-138e2b2.git/Linux/static_armel)
[main][i]Running on: pi24-raspbian10
[main][i]Local IP(s): 192.168.1.144
[main][i]Copyright 2012-2020 Flightradar24 AB
[main][i]https://www.flightradar24.com
[main][i]DNS mode: PING
[main][i]Automatic updates are ENABLED
ERROR: rmmod: ERROR: Module dvb_usb_rtl28xxu is not currently loaded
[httpd][e]bind function failed, errno: 98
[i]PacketSenderConfiguration::fetch_config(): Yoda configuration for this receiver is disabled
[d]TLSConnection::ctor(): Enable verify_peer in production code!
[main][i]Reader thread started
[main][i]Socket server started
[main][i]MLAT data feed started
[reader][i]Initializing reader
[reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --gain -10 --raw --mlat)
[bs][i]Initializing server
[bs][i]Starting server on 0.0.0.0:30003
[master][i]Starting processing thread
[bs][e]Could not bind socket to *:30003, errno=98
[mlat][i]Waiting for MLAT configuration
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
Fri Apr 3 18:20:31 2020 BST EB_SOURCE EB_VERSION starting up.
Using sample converter: UC8, integer/table path
No supported RTLSDR devices found.
[reader][i]Connection terminated
[main][i]Terminating child process 1434 with SIGTERM
[time][i]Synchronizing time via NTP
[time][i]Time synchronized correctly, offset -0.003 seconds
[main][i]Feed Network client started
[main][i]RAW data server started
[feed][i]Downloading configuration
[raw][i]Initializing server
[raw][i]Starting server on 0.0.0.0:30002
[raw][e]Could not bind socket to *:30002, errno=98
[feed][d]fetching configuration
error | write - missing monitor file pointer
error | write - missing monitor file pointer
[feed][i]configuring decoder
[feed][c]Max range AIR: 350.0nm
[feed][c]Max range GND: 100.0nm
error | write - missing monitor file pointer
error | write - missing monitor file pointer
[feed][i]configuration changed
[feed][i]defined 3 servers
[feed][c]Timestamps: optional
info | Stopping ReceiverACSender threads for feed
info | [stats]Stats thread started
info | Configured ReceiverACSender: 185.218.24.22:8099,185.218.24.23:8099,185.218.24.2 4:8099, feed: EHRD433, send_interval: 5s, max age: 15s, send metadata: true, mode: 1, filtering: true
info | Network thread connecting to 185.218.24.22:8099 for feed EHRD433
[feed][n]EHRD433@185.218.24.22:8099/UDP
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
[feed][n]connecting
[feed][n]connected via UDP (fd 24)
[feed][i]Feed connected
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
error | write - missing monitor file pointer
[feed][n]working
error | write - missing monitor file pointer
[reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --gain -10 --raw --mlat)
error | write - missing monitor file pointer
error | write - missing monitor file pointer
[reader][i]Connected to the receiver, configuring
error | write - missing monitor file pointer
[reader][i]Configured, processing messages
error | write - missing monitor file pointer
error | write - missing monitor file pointer
Fri Apr 3 18:20:36 2020 BST EB_SOURCE EB_VERSION starting up.
Using sample converter: UC8, integer/table path
No supported RTLSDR devices found.

[Matheus Moraes]

It seems you have installed the fr24feed already, now you need to run it but typing: fr24feed

Try it and then tell us if it works

[EHRD430]

Hello,

Thanks for your time.

I'm new here and i'm three days trying to install fr24 on my raspberry.
I follow the instruction manual. Downloaded the latest img on fr24.

Everythinh looks fine till i get this message after installing.

[ OK ] Started Daily apt upgrade and clean activities.

On the website i see a recognation off mine active reciever including mac adress and local ip.

How can i get pass true.

Because my status is offline.

Thanks for your help,

Edwin