Troubles with installation

[wiedehopf]

you don't just type in fr24feed ... it's already running as a service.

have you checked http://IP/dump1090 ?
with IP being the IP address of your device?

The default map isn't that pretty, if you want something fancier, install these two
https://github.com/wiedehopf/adsb-sc...ion-for-readsb
https://github.com/wiedehopf/tar1090#tar1090

[EHRD430]

you don't just type in fr24feed ... it's already running as a service.

have you checked http://IP/dump1090 ?
with IP being the IP address of your device?

The default map isn't that pretty, if you want something fancier, install these two
https://github.com/wiedehopf/adsb-sc...ion-for-readsb
https://github.com/wiedehopf/tar1090#tar1090

i check http://IP/dump1090 and i get a map of the world in my screen.

now i'm busy with installing the two urls you post

[EHRD430]

you don't just type in fr24feed ... it's already running as a service.


The default map isn't that pretty, if you want something fancier, install these two
https://github.com/wiedehopf/adsb-sc...ion-for-readsb
https://github.com/wiedehopf/tar1090#tar1090

Well thats great those two maps.
But can you tell me how long the plane is on my map?
Because i see them moving on my map and after a while he's off the radar.
Is that due to the antenna here at my home?

[wiedehopf]

The map will only show what you receive.

check https://www.flightradar24.com/account/data-sharing

Should show you feeding now as well if you see something on the map.

For some statistics: https://github.com/wiedehopf/graphs1090#graphs1090

[EHRD430]

Thanks for all here.
It's working for days now.

[EHRD430]

Hello

As you all can see i on 2020-04-30 thats its all working.
Due to a problem with the raspberry i need to do a fresh install.
It's working but not as it was.

So i install the graphs1090 again.
But thats not working 100%.
I missed the range filled in.

Do you have a solution wiedehopf


graphs1090.jpg

[wiedehopf]

https://github.com/wiedehopf/adsb-wi...ADS-B-receiver

Make sure to configure location for readsb or dump1090 (whatever you use) for the graphs to work.

[EHRD430]

https://github.com/wiedehopf/adsb-wi...ADS-B-receiver

Make sure to configure location for readsb or dump1090 (whatever you use) for the graphs to work.

I forgot the location configuration. Thanks

[Philipr4]

Please excuse me if I am asking something obvious. I am brand new here.
I have a RPi 4B. It is already running raspios-buster-armhf-full. In addition I have a MH5 3.5" touch screen. By itself, everything runs fine. When I put the FR24 MicroSD in, I can see everything is there using Putty, but the screen doesn't work.

How can I integrate the FR-24 and the screen to work so that everything is uniform?

I really want to get this going before my 30 days expires.

Thanks for any help!

[wiedehopf]

I'd install fr24feed on the existing working raspios you have running, this describes how:
https://github.com/wiedehopf/adsb-wi...ADS-B-receiver

There is also FR24 install script, but it's unreliable and offers not proper logging to the journal.