Announcement

Collapse
No announcement yet.

No planes found

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • No planes found

    Hi!

    Iīve just installed the package on my raspberry with a connected Cinergy XS DVBT-Stick, but it does not get any signals.
    The web interface look ok to me.
    I canīt find out which chipset is installed, does anybody know by chance if the stick is suitable?

    Thanks,
    jo
    You do not have permission to view this gallery.
    This gallery has 1 photos.

  • #2
    You can check with this script:
    https://github.com/wiedehopf/adsb-wi...l-sdr-receiver

    Share the output here, then reboot.

    Doing a quick search, it's probably a FC0012 or FC0013 which aren't able to receive 1090 MHz.

    Comment


    • #3
      Did you mean that?

      pi@raspberrypi:~ $ sudo bash -c "$(wget -nv -O - https://raw.githubusercontent.c om/wiedehopf/adsb-scripts/master/rtl_test.sh)"
      2020-04-01 17:39:19 URL:https://raw.githubusercontent.com/wi...f/adsb-scripts /master/rtl_test.sh [2136/2136] -> "-" [1]
      Reading package lists... Done
      Building dependency tree
      Reading state information... Done
      The following NEW packages will be installed:
      rtl-sdr
      0 upgraded, 1 newly installed, 0 to remove and 225 not upgraded.
      Need to get 52.4 kB of archives.
      After this operation, 178 kB of additional disk space will be used.
      Get:1 http://archive.raspberrypi.org/debian buster/main armhf rtl-sdr armhf 0.6- 1+rpt1 [52.4 kB]
      Fetched 52.4 kB in 0s (356 kB/s)
      Selecting previously unselected package rtl-sdr.
      (Reading database ... 95671 files and directories currently installed.)
      Preparing to unpack .../rtl-sdr_0.6-1+rpt1_armhf.deb ...
      Unpacking rtl-sdr (0.6-1+rpt1) ...
      Setting up rtl-sdr (0.6-1+rpt1) ...
      Processing triggers for man-db (2.8.5-2) ...
      -----
      Lost samples in the first 2 seconds after starting the test are common and not a problem!
      Starting 30 second rtl_test, standby!
      -----
      No supported devices found.
      -------
      Test finished!
      More than 2 lost samples per million or other errors probably mean the receiver isn't working correctly.
      Try another power supply before condemning the receiver though!
      -------
      [Wed Apr 1 15:26:26 2020] Under-voltage detected! (0x00050000)
      [Wed Apr 1 15:26:34 2020] Under-voltage detected! (0x00050005)
      [Wed Apr 1 15:27:03 2020] Under-voltage detected! (0x00050005)
      -------
      [Wed Apr 1 15:26:26 2020] Under-voltage detected! (0x00050000)
      [Wed Apr 1 15:26:34 2020] Under-voltage detected! (0x00050005)
      [Wed Apr 1 15:27:03 2020] Under-voltage detected! (0x00050005)
      -------
      Your power supply is not adequate, consider the Official Raspberry Pi power supply.
      Any constant voltage supply with 5.1 to 5.2 Volts and 2.5A capability is also a good choice.
      Inadequate power supplies can lead to many different problems!
      -------

      Cheers,
      Jo

      Comment


      • #4
        .

        Welche Sticks?

        .

        Comment


        • #5
          The test says this:

          No supported devices found.

          This should be rather clear?

          Just get one of these SDRs:
          https://github.com/wiedehopf/adsb-wi...ceiver-choices

          Comment


          • #6
            Ok, I got a new stick now, but still no flight unploaded altough an emirates 777 just passed my house.
            I think I saw a 1 at flights tracked for a second, but there is no one listed under "Show tracked aircraft list"
            Antenna is in my house but close to the window.

            The test looks good, I think. And I did a restart after testing.


            pi@raspberrypi:~ $ sudo bash -c "$(wget -nv -O - https://raw.githubusercontent.com/wiedehopf/adsb-scripts/master/rtl_test.sh)"
            2020-04-03 12:26:24 URL:https://raw.githubusercontent.com/wi...er/rtl_test.sh [2136/2136] -> "-" [1]
            -----
            Lost samples in the first 2 seconds after starting the test are common and not a problem!
            Starting 30 second rtl_test, standby!
            -----
            Found 1 device(s):
            0: Realtek, RTL2838UHIDIR, SN: 00000001

            Using device 0: Generic RTL2832U OEM
            Found Fitipower FC0012 tuner
            Supported gain values (5): -9.9 -4.0 7.1 17.9 19.2
            Sampling at 2400000 S/s.

            Info: This tool will continuously read from the device, and report if
            samples get lost. If you observe no further output, everything is fine.

            Reading samples in async mode...
            Allocating 15 zero-copy buffers
            lost at least 12 bytes
            Signal caught, exiting!

            User cancel, exiting...
            Samples per million lost (minimum): 0
            -------
            Test finished!
            More than 2 lost samples per million or other errors probably mean the receiver isn't working correctly.
            Try another power supply before condemning the receiver though!
            -------
            -------
            No undervoltage detected, looking fine!
            If the dongle is not directly plugged into the Raspberry Pi, lack of power/voltage could still be an issue.
            Even without detected undervoltage a better power supply can often improve reception!
            For optimum performance i would recommend the Official Raspberry Pi power supply.

            Does anybody have an idea why?

            Thanks,
            Jo
            Last edited by JoM; 2020-04-03, 10:37.

            Comment


            • #7
              Found Fitipower FC0012 tuner

              Wrong type again.
              Needs a Rafael Micro 820t tuner.
              Last edited by Oblivian; 2020-04-03, 10:54.
              Posts not to be taken as official support representation - Just a helpful uploader who tinkers

              Comment


              • #8
                Originally posted by abcd567 View Post
                The tuner is listed in that post.
                And I do have an aircraft tracked now. Just one, and none in history.

                So the tracking works, uh?

                Jo
                You do not have permission to view this gallery.
                This gallery has 1 photos.

                Comment


                • #9
                  Not sure why that page was linked or which intent it had. I didn't link it.
                  Also recommended which SDRs to use for ADS-B.

                  Anyhow anything with Fitipower FC0012 FC0013 won't work properly for ADS-B.

                  Comment


                  • #10
                    Ok, thats strange. As well some (german) pages and the amazon comments say they do.
                    Just to make sure that I donīt try a third receiver, is there any other possible error that I can track planes (which I do if they pass close enough)
                    but they donīt get uploaded to flightradar24?

                    Thanks,
                    Jo

                    Comment


                    • #11
                      This is what I bought based on the link and the amazon ratings:


                      You do not have permission to view this gallery.
                      This gallery has 1 photos.
                      Last edited by JoM; 2020-04-03, 14:16.

                      Comment


                      • #12
                        FR24 only takes data once you receive the aircraft for some time.


                        Seems the seller lied about the tuner.
                        There is a good reason why i'm recommending the SDRs i'm recommending, they are name brand.
                        I'll link the list again:

                        Comment


                        • #13
                          Ok, I just checked your recommendations. They are way too expensive for me, canīt afford €25 for the stick plus another €60 for cable and antenna.
                          One of your links also shows this one, would that work?


                          Thanks,
                          Jo

                          Comment


                          • #14
                            It's by far not as good, but it will work fine (in contrast to the other sticks you've had bad luck with)

                            Maybe just get the green AirNav stick?
                            https://radarbox24.myshopify.com/col...ads-b-receiver

                            And this antenna: https://www.amazon.co.uk/Antenna-Con.../dp/B01LWWUMXA

                            That shouldn't run more than 30 combined?

                            The filtered/amplified ADS-B specific SDR sticks are quite a bit better.
                            Doesn't matter if you don't care about your range i suppose.

                            Comment


                            • #15
                              Ok, thanks again.
                              Canīt get that antenna in gemany.
                              But now I have up to three aircraft tracked, even for a longer time.
                              Can you please check my settings? Maybe there is something wrong, there ist
                              nothing in the Host/IP section.

                              Thanks,
                              Jo
                              You do not have permission to view this gallery.
                              This gallery has 1 photos.
                              Last edited by JoM; 2020-04-04, 10:46.

                              Comment

                              Working...
                              X