Announcement

Collapse
No announcement yet.

[BUG] FR24feed 1.0.24-7 - Config Save Changes issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • elljay
    replied
    Anyone know what the change was in 1.0.24-7? As usual the changelog doesn't mention it...

    Leave a comment:


  • lodervsm
    replied
    Thanks for your help... Updated

    Leave a comment:


  • abcd567
    replied

    Try this:

    Code:
    cd ~/  
    
    wget https://repo-feed.flightradar24.com/rpi_binaries/fr24feed_1.0.24-8_armhf.deb  
    
    sudo dpkg -i fr24feed_1.0.24-8_armhf.deb  
    
    sudo systemctl restart fr24feed
    Last edited by abcd567; 2020-02-01, 21:30.

    Leave a comment:


  • lodervsm
    replied
    This is what I am getting
    Attached Files

    Leave a comment:


  • Oblivian
    replied
    You need to
    sudo apt-get update

    first

    And then sudo apt-get install fr24feed

    Leave a comment:


  • lodervsm
    replied
    sudo apt policy fr24feed
    fr24feed:
    Installed: 1.0.24-7
    Candidate: 1.0.24-7
    Attached Files

    Leave a comment:


  • Oblivian
    replied
    Originally posted by lodervsm View Post
    Has any new update been issued to resolve this?

    How can we know that an update has been issued? (not related to such cases only)

    Does the fr24 feeding software update automatically? Or I need to restart my PI to make update?

    Thanks a lot.
    If update has been left on. It will

    sudo apt policy fr24feed
    fr24feed:
    Installed: 1.0.24-7
    Candidate: 1.0.24-8

    Leave a comment:


  • lodervsm
    replied
    Has any new update been issued to resolve this?

    How can we know that an update has been issued? (not related to such cases only)

    Does the fr24 feeding software update automatically? Or I need to restart my PI to make update?

    Thanks a lot.

    Leave a comment:


  • Oblivian
    replied
    -rw-rw-rw- 1 root root 198 Jul 8 2019 fr24feed.ini

    And so are all the directories and associated files installed. Seems the fr24 user that was once used may have been zapped and or had access revoked in favour of default system account?

    Install script:
    # Run the signup wizard
    if [ $AUTO_SIGNUP -eq 0 ]; then
    fr24feed --signup
    chmod a+rw /etc/fr24feed.ini

    Though that doesn't run when you apt-get update I wouldn't think

    And my install log doesn't reflect changes made yesterday

    Looking at processes, fr24feed is run as fr24..

    fr24 18925 3.2 1.2 170552 12072 ? Ssl Jan14 35:27 /usr/bin/fr24feed

    Leave a comment:


  • abcd567
    replied
    Originally posted by Oblivian View Post
    Potentially another change in permissions.
    No, I dont think so. Tried both the following commands on 24feed ver 1.0.24-7, but no success

    Code:
    sudo mount -o remount,rw /
    
    sudo chmod 666 /etc/fr24feed.ini


    Originally posted by Oblivian View Post
    Or failure of the build in web portal
    This is most likely cause.

    .

    Later Addition:
    I will try this command also when back home:
    Code:
    sudo chown fr24:fr24 /etc/fr24feed.ini
    Last edited by abcd567; 2020-01-14, 20:48.

    Leave a comment:


  • Oblivian
    replied
    Potentially another change in permissions. Or failure of the build in web portal

    Would need to compare the install script to see if there are any chmod/user adjustments from previous

    Leave a comment:


  • abcd567
    replied
    Thanks Oblivian for creating this thread.

    This is how I did it:
    (1) Opened file fr24feed.ini for editing
    Code:
    sudo nano /etc/fr24feed.ini
    (2) After editing: Saved (Ctrl + o) and Closed file (Ctrl + x)

    (3) Finally restarted fr24feed
    Code:
    sudo systemctl restart fr24feed


    Contents of file fr24feed.ini
    (Replaced xxxxxxxxxxxxxxxx by actual fr24 key)
    Using fr24feed-provided dump1090-mutability ver 1.14

    Pi24 image with receiver=dvbt
    Raspbian image with receiver=dvbt
    Using user-installed dump1090-mutability ver 1.15 or dump1090-fa

    Raspbian Image with receiver=beast-tcp
    receiver="dvbt"
    fr24key="xxxxxxxxxxxxxxxx"
    bs="no"
    raw="no"
    logmode="1"
    procargs="--gain -10"
    windowmode="0"
    mpx="no"
    mlat="yes"
    mlat-without-gps="yes"
    receiver="beast-tcp"
    fr24key="xxxxxxxxxxxxxxxx"
    host="127.0.0.1:30005"
    bs="no"
    raw="no"
    logmode="1"
    logpath="/var/log/fr24feed"
    mlat="yes"
    mlat-without-gps="yes"

    use-http=yes
    http-timeout=20
    Last edited by abcd567; 2020-01-14, 19:52.

    Leave a comment:


  • [BUG] FR24feed 1.0.24-7 - Config Save Changes issue

    It is becoming apparent that the latest version does not allow changes to be saved within the config web-page on some setups (Stretch upgraded, Buster - Pi24 appears un-effected at this time unless updated)

    To make changes to this version (until fixed) you will need to edit the config file manually

    sudo nano /etc/fr24feed.ini
    Last edited by Oblivian; 2020-01-14, 18:15.
Working...
X