Announcement

Collapse
No announcement yet.

Odroid XU4 running off an airspy

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Odroid XU4 running off an airspy

    Hi,

    I currently feed of my Radacape but want to add my Odroid XU4 to FR24. Now I have dabbled with adding FR24 to my current FA feed running on the Odroid XU4 but there are a few issues so far. So I am thinking about just running a pure FR24 on the Odroid. I have a script for the Airspy to work with the Odroid which works, so just checking which FR24 install option I should go. I take it I should use the Linux option Linux archive amd64/x86_64 or ????

    Jeff

  • #2
    https://github.com/wiedehopf/adsb-wi...ng-dump1090-fa

    Here are some notes included on how to configure fr24feed for working with dump1090-fa.
    That's after installing with the script.

    Comment


    • #3
      Yes, I was just looking at that thread. So to confirm, which FR24 option should I use.
      Last edited by orion_jb2001; 2019-10-06, 04:01.

      Comment


      • #4
        Originally posted by orion_jb2001 View Post
        Yes, I was just looking at that thread. So to confirm, which FR24 option should I use, the Linux archive amd64/x86_64 image??
        Is cpu of Odroid XU4 i386/i686/amd64?
        What is output of following command?
        Code:
        lscpu

        Comment


        • #5
          Hmmm not having much luck here at all. FR24 instructions are a bit vague compared to other ADS B programs.

          Comment


          • #6
            ```
            Architecture: armv7l
            Byte Order: Little Endian
            CPU(s): 8
            On-line CPU(s) list: 0-7
            Thread(s) per core: 1
            Core(s) per socket: 4
            Socket(s): 2
            Vendor ID: ARM
            Model: 3
            Model name: Cortex-A7
            Stepping: r0p3
            CPU max MHz: 2000.0000
            CPU min MHz: 200.0000
            BogoMIPS: 90.00
            Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae
            ```

            Comment


            • #7
              I am aming for just a FR24 application. I may add flightaware feed later, but those scripts you have made look fairly straight forward.

              Comment


              • #8
                root@odroidxu4:~# fr24feed-status
                * FR24 Feeder/Decoder Process: running
                * FR24 Stats Timestamp: 2019-10-06 04:48:21
                * FR24 Link: connected [UDP]
                * FR24 Radar: T-YGDH1
                * FR24 Tracked AC:
                * Receiver: down
                * FR24 MLAT: not running

                Comment


                • #9
                  Run this script if the instructions are too much for you:
                  https://github.com/wiedehopf/adsb-wi...or-dump1090-fa

                  Or just get the bundle:
                  https://github.com/wiedehopf/adsb-sc...for-dump1090fa

                  After that run the airspy-conf script if you are using an Airspy.
                  (if you have already run it, run it again!)


                  My guess you didn't install dump1090-fa.
                  Which airspy-conf requires and the instructions on how to configure fr24feed also require.

                  Comment


                  • #10
                    Originally posted by orion_jb2001 View Post
                    ```
                    Architecture: armv7l
                    Byte Order: Little Endian
                    CPU(s): 8
                    On-line CPU(s) list: 0-7
                    Thread(s) per core: 1
                    Core(s) per socket: 4
                    Socket(s): 2
                    Vendor ID: ARM
                    Model: 3
                    Model name: Cortex-A7
                    Stepping: r0p3
                    CPU max MHz: 2000.0000
                    CPU min MHz: 200.0000
                    BogoMIPS: 90.00
                    Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae
                    ```
                    CPU is armv7l. Same method as that for Raspberry Pi, will apply for installing FR24 feeder and Flightaware feeder.

                    (1) First install a decoder like dump1090-fa, or dump1090-mutability ver 1.15~dev.
                    (2) Next use following script to install FR24 feeder.

                    Code:
                    sudo bash -c "$(wget -O - https://repo-feed.flightradar24.com/install_fr24_rpi.sh)"
                    NOTE: Make sure during settings dialouge, you do not choose "Receiver = DVB-T", choose "Receiver = ModeS Beast (TCP)" and "Host/port = 127.0.0.1:30005"


                    In web browser go to following address to access Settings page
                    IP-of-Pi:8754/settings.html
                    After making any changes, click "Save" button then "Restart" button.
                    Both these buttons are at bottom-right of settoings page.
                    Please see screeshot of settings page below.

                    FR24 settings - External dump1090 - BEAST-TCP.png

                    NOTE 2:
                    In this forum, to post code, do not use ``` . Instead use [/code] below and [code] above.
                    Last edited by abcd567; 2019-10-06, 08:08.

                    Comment


                    • #11
                      Ok thanks for you help. I have got it feeding FR24 now, just checking some other things stand by. Used your muta 1.15 installl ABC

                      Comment


                      • #12
                        Right got it sorted out. Flightaware getting data, FR24 receiving data, can see a skyaware 8080 map. Just got to do a few changes, your tar1090 and graphs wiedehoph. Only 1 hiccup, forgot to do the airspy script but once done, all up and running. I think there might be, but is there a local FR map where you just see your detections??

                        Comment


                        • #13
                          Used your "How to Install dump1090-mutability_1.15~dev on RPi" post ABCD, which sort of back to front to get to the FR feed but worked no issues.

                          Comment


                          • #14
                            One question FR24 wise, it seems to have picked a more distant local airport for my ID, not our local 5 k away, can you change that?

                            Comment


                            • #15
                              Originally posted by orion_jb2001 View Post
                              Right got it sorted out. Flightaware getting data, FR24 receiving data, can see a skyaware 8080 map. Just got to do a few changes, your tar1090 and graphs wiedehoph. Only 1 hiccup, forgot to do the airspy script but once done, all up and running. I think there might be, but is there a local FR map where you just see your detections??
                              http://your.internal.network.ip/dump1090-fa and also /graphs1090

                              Comment

                              Working...
                              X