Announcement

Collapse
No announcement yet.

Beginner - Setup successfully on PIAWare, but no aircrafts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Oblivian
    replied
    It still amazes us that there hasn't been a re released fix version /removed option with the number of times it's pooped up and we've pointed it out as a bug

    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • magnum
    replied
    Sometimes reading more carefully can prevent stupid questions

    Thanks for your support

    Leave a comment:


  • Oblivian
    replied
    :30005 from :30002

    /Edit snap

    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • magnum
    replied
    I got it running!

    Changed the port from 30002 to 30005

    fr24status.jpg

    Leave a comment:


  • magnum
    replied
    here we go:

    fr24settings2.jpg

    Leave a comment:


  • abcd567
    replied
    Post screenshot of following web page:

    IP-of-PI:8754/settings.html

    (Remove your fr24 key from screenshot befire posting).

    .

    Leave a comment:


  • Beginner - Setup successfully on PIAWare, but no aircrafts

    Hi all

    i'm a beginner with tracking and feeding. Today i've received my ordered bundle with a Raspberry 3 B with power supply, case and cables, the Flightaware Pro Plus stick and an indoor antenna.
    I've installed the latest PIAware image and the device is running fine with Flightaware, i am deeply impressed about the range of the indoor antenna behind a window on upper floor.

    Now i've installed additionally the FR24 Feeder based on the instructions here in the forum. Everything seem fine, but the amount of Aircrafts is "0" and no data are uploaded to FR24

    Output of Status:
    pi@piaware:~ $ sudo fr24feed-status
    [ ok ] FR24 Feeder/Decoder Process: running.
    [ ok ] FR24 Stats Timestamp: 2019-07-18 19:04:14.
    [ ok ] FR24 Link: connected [UDP].
    [ ok ] FR24 Radar: T-EDFH53.
    [ ok ] FR24 Tracked AC:.
    [ ok ] Receiver: connected (0 MSGS/ SYNC).
    [FAIL] FR24 MLAT: not running ... failed!

    Attached also the config screen of the web interface. I've selected ModeS Beast (TCP) as instructed.
    FR24settings.jpg

    Any ideas how to fix that would be appreciated.

    Uwe
Working...
X