Announcement

Collapse
No announcement yet.

Raspberry Pi with 3.5" LCD

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • kiwiandy
    replied
    Originally posted by Oblivian View Post
    Pi image by chance?
    Thanks very much!.. that did the trick!... all working now

    Leave a comment:


  • Oblivian
    replied
    Originally posted by kiwiandy View Post
    Thanks Wiedehopf, but it seems like Im going to need more than good luck?

    pi@raspberrypi:~ $ sudo su -l

    SSH is enabled and the default password for the 'pi' user has not been changed.
    This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.


    root@raspberrypi:~# mkdir -p /etc/systemd/system/getty@tty1.service.d
    root@raspberrypi:~# echo "[Service]" > /etc/systemd/system/getty@tty1.service.d/override.conf
    -su: /etc/systemd/system/getty@tty1.service.d/override.conf: Read-only file system

    Pi image by chance?


    NOTE: The Pi24 image sometimes mounts as "read-only file system". As a result installation of other feeders fails and gives erro messages. In this case first change read-only file system to read & write system by following command, then try again to install other feeders.
    Code:
    sudo mount -o remount,rw /

    Leave a comment:


  • kiwiandy
    replied
    Thanks Wiedehopf, but it seems like Im going to need more than good luck?

    pi@raspberrypi:~ $ sudo su -l

    SSH is enabled and the default password for the 'pi' user has not been changed.
    This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.


    root@raspberrypi:~# mkdir -p /etc/systemd/system/getty@tty1.service.d
    root@raspberrypi:~# echo "[Service]" > /etc/systemd/system/getty@tty1.service.d/override.conf
    -su: /etc/systemd/system/getty@tty1.service.d/override.conf: Read-only file system

    Leave a comment:


  • wiedehopf
    replied
    you can do this once before all the commands:

    Code:
    sudo su -l
    This means you will be logged in as root and have sufficient permissions.

    Be careful, with this little understanding you might destroy your system on accident.
    (make it not boot anymore)

    Good luck.

    Leave a comment:


  • Oblivian
    replied
    You need SUDO infront of each command (that will need to edit or change a file) to give elevated rights/permissions.

    Start there and have another go.

    Leave a comment:


  • Oblivian
    replied
    @ signs triggered moderation.

    Leave a comment:


  • kiwiandy
    replied
    Originally posted by wiedehopf View Post
    You can follow this answer here:
    https://unix.stackexchange.com/a/488003

    Don't edit /etc/systemd/logind.conf, you still want to have mutiple terminals so you can change terminal and login by pressing Alt-F2

    Follow this 2nd block of the answer:
    Code:
    mkdir -p /etc/systemd/system/getty@tty1.service.d
    echo "[Service]" > /etc/systemd/system/getty@tty1.service.d/override.conf
    echo "ExecStart=" >> /etc/systemd/system/getty@tty1.service.d/override.conf
    echo "ExecStart=-/usr/bin/view1090-fa" >> /etc/systemd/system/getty@tty1.service.d/override.conf
    echo "StandardInput=tty"  >> /etc/systemd/system/getty@tty1.service.d/override.conf
    echo "StandardOutput=tty"  >> /etc/systemd/system/getty@tty1.service.d/override.conf
    Note that i've here replace /path/program -arg1 -arg2 by /usr/bin/view1090-fa so view1090-fa is started.
    Good luck

    I was out of town for the last week, and just got a chance to try this.
    I had a read of the linked info but didnt have any success with entering the commands as you showed.
    I am getting permission denied errors:
    -bash: /etc/systemd/system/getty@tty1.service.d/override.conf: Permission denied

    so then I tried the another method suggested on that page:

    #mkdir /etc/systemd/system/getty@tty1.service.d
    #cd /etc/systemd/system/getty@tty1.service.d
    #nano override.conf
    and add
    [Service]
    ExecStart=
    ExecStart=-/usr/bin/view1090-fa

    however when I try to exit and save the file, it also gives an error permission denied
    pi@raspberrypi:/etc/systemd/system/getty@tty1.service.d $ ls -l
    total 4
    -rw-r--r-- 1 root root 30 Oct 9 2018 noclear.conf

    Leave a comment:


  • kiwiandy
    replied
    and I must have a minimum of 4 posts to reply.. yet it wont let me reply after 4 posts... try again...

    Leave a comment:


  • kiwiandy
    replied
    Wiedhopf, thanks for your help, but I am having "permission denied" errors...

    Leave a comment:


  • kiwiandy
    replied
    Thanks very much! Will give that a try

    Leave a comment:


  • wiedehopf
    replied
    You can follow this answer here:
    https://unix.stackexchange.com/a/488003

    Don't edit /etc/systemd/logind.conf, you still want to have mutiple terminals so you can change terminal and login by pressing Alt-F2

    Follow this 2nd block of the answer:
    Code:
    mkdir -p /etc/systemd/system/getty@tty1.service.d
    echo "[Service]" > /etc/systemd/system/getty@tty1.service.d/override.conf
    echo "ExecStart=" >> /etc/systemd/system/getty@tty1.service.d/override.conf
    echo "ExecStart=-/usr/bin/view1090-fa" >> /etc/systemd/system/getty@tty1.service.d/override.conf
    echo "StandardInput=tty"  >> /etc/systemd/system/getty@tty1.service.d/override.conf
    echo "StandardOutput=tty"  >> /etc/systemd/system/getty@tty1.service.d/override.conf
    Note that i've here replace /path/program -arg1 -arg2 by /usr/bin/view1090-fa so view1090-fa is started.
    Good luck

    Leave a comment:


  • kiwiandy
    replied
    Thanks very much that does the trick.
    Next stupid question.. how do I get the view1090-fa command to autoexecute every time the Pi reboots so that I dont need to connect a keyboard?

    Leave a comment:


  • Oblivian
    replied
    Always the 8754:/monitor.txt too for super crude.

    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • wiedehopf
    replied
    First use this: https://github.com/wiedehopf/adsb-wi...for-dump1090fa

    Then on the console you can just type:
    view1090-fa

    It will show you a crude list of aircraft on the console.

    Alternatively you could install the graphical user interface and open the same web page you are checking.

    Leave a comment:


  • kiwiandy
    started a topic Raspberry Pi with 3.5" LCD

    Raspberry Pi with 3.5" LCD

    I have got my Pi up and running, and sending data and can view the data on my PC via the web page.
    My Pi also has a 3.5" LCD display, that I would like to echo the data feed to so that I dont need to keeep checking on my PC that its working.

    Any basic help/commands I can enter to get this to display?
    ie
    ModeS: C82272 Callsign: SDA652
    Lat: -43.3851
    Long: 172.6252
    Alt: 5900ft
    SQW: 5535



    please bear in mind I am an absolut Linux novice so would appreciate detailed command line info
    Thanks
    Andy
Working...
X