Announcement

Collapse
No announcement yet.

ADS-B Receiver I built not showing up to Register

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • robertoluna
    replied
    Okay, thank you! After some waiting and reflashing the SD card, I got it to work and is now running flawlessly.

    Leave a comment:


  • Oblivian
    replied
    And if you intend on feeding other sites once set up.

    Don't use that method. And pick one of the others where the main decoder program is installed first

    And you add the feeder software after to use the data it creates

    https://forum.flightradar24.com/thre...24-Data-Feeder

    Leave a comment:


  • Oblivian
    replied
    That can only likely mean the stick isn't recognised

    Try this instead

    https://forum.flightradar24.com/showthread.php?t=12643

    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • robertoluna
    replied
    The Instructions from "build your own" in the flightradar24 website. I can't post a link since I just joined and can't post links yet.

    Leave a comment:


  • Oblivian
    replied
    Which instructions

    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • ADS-B Receiver I built not showing up to Register

    I bought a raspberry pi 3 B+, a 8GB SD Card, an indoor ADS-B Antenna and USB dongle. I followed all instructions and connected the raspberry pi to ethernet and power but doesn't show up in the list to register the receiver. Please help, thank you.
Working...
X