Announcement

Collapse
No announcement yet.

Successful Feed?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dreamflight767
    replied
    Originally posted by wiedehopf View Post
    If dvbt is selected as a receiver, fr24feed installs its own version of dump1090 that is incompatible with dump1090-fa.
    (It also starts that version and both programs fight over the dongle, it's a mess)

    The lighty-disable-mod deactivated the lighttpd integration which prevented you from viewing the dump1090-fa webview.
    Also to make fr24feed play nice with dump1090-fa it need to be set to receiver-type beast and use the appropriate host/port.

    If you fancy statistics, make sure to checkout the graphs: https://github.com/wiedehopf/graphs1090#graphs1090

    Have a nice day
    I'll check it out thanks. Enjoy your day too.

    Leave a comment:


  • wiedehopf
    replied
    If dvbt is selected as a receiver, fr24feed installs its own version of dump1090 that is incompatible with dump1090-fa.
    (It also starts that version and both programs fight over the dongle, it's a mess)

    The lighty-disable-mod deactivated the lighttpd integration which prevented you from viewing the dump1090-fa webview.
    Also to make fr24feed play nice with dump1090-fa it need to be set to receiver-type beast and use the appropriate host/port.

    If you fancy statistics, make sure to checkout the graphs: https://github.com/wiedehopf/graphs1090#graphs1090

    Have a nice day

    Leave a comment:


  • Dreamflight767
    replied
    Thank you for everything. Appreciate you walking me through.

    Leave a comment:


  • Dreamflight767
    replied
    Originally posted by wiedehopf View Post
    That's perfect.

    Does everything work after a reboot? (command for that is: sudo reboot)
    Amazing! Thank you so much. I honestly have no idea what you did but I'm very grateful.

    Leave a comment:


  • Dreamflight767
    replied
    Originally posted by wiedehopf View Post
    That's perfect.

    Does everything work after a reboot? (command for that is: sudo reboot)
    Stand by please

    Leave a comment:


  • wiedehopf
    replied
    That's perfect.

    Does everything work after a reboot? (command for that is: sudo reboot)

    Leave a comment:


  • Dreamflight767
    replied
    Originally posted by wiedehopf View Post
    yes they are correct -.-.
    OK:

    This is what I get after I followed your steps in reply #9

    > > pi@piaware:~ $ cat /etc/fr24feed.ini
    > > receiver="beast-tcp"
    > > fr24key="d58d8dbeb9f275d4"
    > > host="127.0.0.1:30005"
    > > bs="no"
    > > raw="no"
    > > logmode="0"
    > > logpath="/var/log"
    > > mlat="yes"
    > > mlat-without-gps="yes"

    Leave a comment:


  • wiedehopf
    replied
    yes they are correct -.-.

    Leave a comment:


  • Dreamflight767
    replied
    OK. And the steps I posted in reply 23 are correct?

    Leave a comment:


  • wiedehopf
    replied
    In you current configuration every start of fr24feed it will screw with flightaware.

    After you reconfigure it the screwing will stop.

    Leave a comment:


  • Dreamflight767
    replied
    Originally posted by wiedehopf View Post
    Yeah you just put all that stuff on the command line, that's not where it belongs.

    Code:
    sudo fr24feed --reconfigure
    That's how you open the configuration.
    When asked for values, use the values provided in the long segment
    (Beast as a receiver type, then TCP, then 127.0.0.1 for a hostname and so forth)

    After that /etc/fr24feed.ini should have the correct values.
    And just to make sure:

    -I log into pi
    -I type: sudo fr24feed --reconfigure
    -Reconfigure will give me options that posted in reply #9
    -I enter the questions w/ the values/data you posted above.

    And it won't screw w/ my flightaware feed?
    Last edited by Dreamflight767; 2019-04-16, 16:40.

    Leave a comment:


  • wiedehopf
    replied
    Yeah you just put all that stuff on the command line, that's not where it belongs.

    Code:
    sudo fr24feed --reconfigure
    That's how you open the configuration.
    When asked for values, use the values provided in the long segment
    (Beast as a receiver type, then TCP, then 127.0.0.1 for a hostname and so forth)

    After that /etc/fr24feed.ini should have the correct values.

    Leave a comment:


  • Dreamflight767
    replied
    Originally posted by wiedehopf View Post
    Yeah didn't quite make clear that it was a command you need to use:

    Code:
    cat /etc/fr24feed.ini
    This will show the configuration.

    Anyway what does

    fr24feed-status

    show?
    Maybe it's already working?
    Sorry. Taking care of my son while I do this.

    Leave a comment:


  • Dreamflight767
    replied
    pi@piaware:~ $ cat /etc/fr24feed.ini
    receiver="dvbt"
    fr24key="d58d8dbeb9f275d4"
    path="/usr/lib/fr24/dump1090"
    bs="no"
    raw="no"
    logmode="0"
    procargs="Step 4.1 - Receiver selection (in order to run MLAT please use DVB-T stick with dump1090 utility bundled with fr24feed):"
    logpath="/var/log"
    mlat="yes"
    mlat-without-gps="yes"
    pi@piaware:~ $
    pi@piaware:~ $ receiver="dvbt"
    pi@piaware:~ $ fr24key="d58d8dbeb9f275d4"
    pi@piaware:~ $ path="/usr/lib/fr24/dump1090"
    pi@piaware:~ $ bs="no"
    pi@piaware:~ $ raw="no"
    pi@piaware:~ $ logmode="0"
    pi@piaware:~ $ procargs="Step 4.1 - Receiver selection (in order to run MLAT please use DVB-T stick with dump1090 utility bundled with fr24feed):"
    pi@piaware:~ $ logpath="/var/log"
    pi@piaware:~ $ mlat="yes"
    pi@piaware:~ $ mlat-without-gps="yes"
    -bash: mlat-without-gps=yes: command not found
    pi@piaware:~ $ pi@piaware:~ $
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ cat /etc/fr24feed.ini
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ receiver="dvbt"
    pi@piaware:~ $ fr24key="d58d8dbeb9f275d4"
    pi@piaware:~ $ path="/usr/lib/fr24/dump1090"
    pi@piaware:~ $ bs="no"
    pi@piaware:~ $ raw="no"
    pi@piaware:~ $ logmode="0"
    pi@piaware:~ $ procargs="Step 4.1 - Receiver selection (in order to run MLAT please use DVB-T stick with dump1090 utility bundled with fr24feed):"
    pi@piaware:~ $ logpath="/var/log"
    pi@piaware:~ $ mlat="yes"
    pi@piaware:~ $ mlat-without-gps="yes"
    -bash: mlat-without-gps=yes: command not found
    pi@piaware:~ $ pi@piaware:~ $
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ receiver="dvbt"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ fr24key="d58d8dbeb9f275d4"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ path="/usr/lib/fr24/dump1090"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ bs="no"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ raw="no"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ logmode="0"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ procargs="Step 4.1 - Receiver selection (in order to run MLAT please use DVB-T stick with dump1090 utility bundled with fr24feed):"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ logpath="/var/log"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ mlat="yes"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ mlat-without-gps="yes"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ -bash: mlat-without-gps=yes: command not found
    -bash: -bash:: command not found
    pi@piaware:~ $ pi@piaware:~ $ pi@piaware:~ $
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ -bash: pi@piaware:~: command not found
    -bash: -bash:: command not found
    pi@piaware:~ $ pi@piaware:~ $
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $

    Leave a comment:


  • wiedehopf
    replied
    Yeah didn't quite make clear that it was a command you need to use:

    Code:
    cat /etc/fr24feed.ini
    This will show the configuration.

    Anyway what does

    fr24feed-status

    show?
    Maybe it's already working?

    Leave a comment:

Working...
X