If you can see them then you should be receiving them easily.
If your dongle had an SMA connector and not MCX you could just use a piece of wire about 6.8 cm long and place it into the dongle.
With the MCX connector it's not easy to exclude the possibility of the antenna cable not being connected to the antenna anymore (internally).
(But the antenna is new and probably intact)
Does this aircraft list at least work for you (replace the IP address with that of you RPi)
The map can be changed like this: https://forum.flightradar24.com/thre...uot-Water-Mark
@abcd567 that thread can probably also use the remount command
Which power supply are you using for the RPi?
Maybe just try a different one, a phone charger with USB output for example.
Sometimes the USB receiver doesn't work properly with a weak power supply.
If your dongle had an SMA connector and not MCX you could just use a piece of wire about 6.8 cm long and place it into the dongle.
With the MCX connector it's not easy to exclude the possibility of the antenna cable not being connected to the antenna anymore (internally).
(But the antenna is new and probably intact)
Does this aircraft list at least work for you (replace the IP address with that of you RPi)
The map can be changed like this: https://forum.flightradar24.com/thre...uot-Water-Mark
@abcd567 that thread can probably also use the remount command
Which power supply are you using for the RPi?
Maybe just try a different one, a phone charger with USB output for example.
Sometimes the USB receiver doesn't work properly with a weak power supply.
Comment