Windows Setup/Feed Migration (virtualVM) Assistance

[abcd567]

In the drop-down of screenshot below, remove checkmark from:

"Ignore Hubs or Composite Parents"

Then see if your dongle is listed as RTL2838UHIDIR (dongle with infra-red controller). Generic dongles have a remote controller which works on infra-red





USB-2-0-Blue-TV-Stick-DAB-FM-DVB-T-RTL2832-R820T-SDR-RTL-SDR-Dongle.jpg_640x640.jpg

[wiedehopf]

Yeah running dump1090 in windows and connecting to that with the linux feeder seems like the best idea.

But explaining that ... no i give up

[Oblivian]

Unplug the dongle so you know which one of those 6 it is.

Is that with the virtual machine on or off?
Might also be that it's assigned to the virtual machine and not displaying for zadig.

I'm confused anyway are you trying to use the dongle in the virtual machine or in Windows?
You can't use it twice at once.

Cause posting replies to 3 different people with different answers is so much easier on us

From the jist of it I got.. and in no particular order.

Use to run windows feeder.
Trying to switch to VM

Works for a period, then the stick goes offline.
- but for some reason did a total reinstall and made more posts that looks like broken raspian instead
- later turned into 'my stick doesnt work at all - see image' - (but may not be at-all) still not sure if rasbpian is back in working order

To me, it screamed of wedging or a fault with the comms between host and VM

So my latest suggestion, was run dump1090 under win and see if the stick goes offline to the host too. To rule out the VM. As I suspect it may.

[wiedehopf]

Unplug the dongle so you know which one of those 6 it is.

Is that with the virtual machine on or off?
Might also be that it's assigned to the virtual machine and not displaying for zadig.

I'm confused anyway are you trying to use the dongle in the virtual machine or in Windows?
You can't use it twice at once.

[arash]

Maybe in the Zadig drop down menu actually select the USB stick instead of the "bulk interface"?

This is all that I have in Zadig:

8.jpg

[wiedehopf]

Maybe in the Zadig drop down menu actually select the USB stick instead of the "bulk interface"?

[arash]

It is still not clear to us. Please explain more


Does it work at all
Does it start to work then stop

What stick is it

If you look at windows device manager. Do you see it.

Does dump1090 under windows (not the VM) work

https://www.rtl-sdr.com/ads-b-decoder-dump1090-now-available-windows/

Sent from my EML-L09 using Tapatalk

yes it work when I use it to run SDRsharp.

as I described on post #260, the the red circle start to flash & never stop.

Which version should I download for Windows 7?

6.jpg

I got this massage when start dump1090.bat:

7.jpg

[Oblivian]

So what can I do to fix this problem?

It is still not clear to us. Please explain more


Does it work at all
Does it start to work then stop

What stick is it

If you look at windows device manager. Do you see it.

Does dump1090 under windows (not the VM) work

https://www.rtl-sdr.com/ads-b-decoder-dump1090-now-available-windows/

Sent from my EML-L09 using Tapatalk

[arash]

.


Is My DVB-T RTL SDR Dongle Healthy?

.

Instead of this picture:

Zadig-3.png

I see this:

zad4.jpg

you can see the USB ID is ok.

also, when I run rtl_test.exe, I got this massage:

zad5.jpg

[arash]

Possibly your Dongle is NOT attached to the VM. You have to attach it.
The two screenshots below give steps to attach the dongle (steps 1 to 7):

[ATTACH=CONFIG]10859[/ATTACH][ATTACH=CONFIG]10860[/ATTACH]

I do all the steps according to the instructions.

[arash]

After this, https://forum.flightradar24.com/thre...l=1#post122373

I questioned if the stick is wedging and going offline. As it seems to work, then not. So he reinstalled to try 'fix' and made things worse

So what can I do to fix this problem?

[Oblivian]

Possibly your Dongle is NOT attached to the VM. You have to attach it.
The two screenshots below give steps to attach the dongle (steps 1 to 7):

[ATTACH=CONFIG]10859[/ATTACH][ATTACH=CONFIG]10860[/ATTACH]

After this, https://forum.flightradar24.com/thre...l=1#post122373

I questioned if the stick is wedging and going offline. As it seems to work, then not. So he reinstalled to try 'fix' and made things worse

[abcd567]

Hi

on the usb panel on dashboard, the red circle flashes and the connection between the dongles and the operating system is not established, like this:

[ATTACH=CONFIG]10827[/ATTACH]

& when in type fr24feed-status, i got this massage:

Receiver:down ... failed

fr24MLAT : not running ....failed

Possibly your Dongle is NOT attached to the VM. You have to attach it.
The two screenshots below give steps to attach the dongle (steps 1 to 7):

VM USB -1.pngVM USB -2.png

[abcd567]

.


Is My DVB-T RTL SDR Dongle Healthy?

.

[Oblivian]

Hi

on the usb panel on dashboard, the red circle flashes and the connection between the dongles and the operating system is not established, like this:

[ATTACH=CONFIG]10827[/ATTACH]

& when in type fr24feed-status, i got this massage:

Receiver:down ... failed

fr24MLAT : not running ....failed

Your original said it works fine and then does that? If so, software can't fix this. Your stick is going faulty and windows can't see it anymore

Sent from my EML-L09 using Tapatalk