Announcement

Collapse
No announcement yet.

Windows Setup/Feed Migration (virtualVM) Assistance

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • arash
    replied
    Originally posted by abcd567 View Post
    Instead of this picture:

    Zadig-3.png

    I see this:

    zad4.jpg

    you can see the USB ID is ok.

    also, when I run rtl_test.exe, I got this massage:

    zad5.jpg

    Leave a comment:


  • arash
    replied
    Originally posted by abcd567 View Post
    Possibly your Dongle is NOT attached to the VM. You have to attach it.
    The two screenshots below give steps to attach the dongle (steps 1 to 7):

    [ATTACH=CONFIG]10859[/ATTACH][ATTACH=CONFIG]10860[/ATTACH]
    I do all the steps according to the instructions.

    Leave a comment:


  • arash
    replied
    Originally posted by Oblivian View Post
    After this, https://forum.flightradar24.com/thre...l=1#post122373

    I questioned if the stick is wedging and going offline. As it seems to work, then not. So he reinstalled to try 'fix' and made things worse
    So what can I do to fix this problem?

    Leave a comment:


  • Oblivian
    replied
    Originally posted by abcd567 View Post
    Possibly your Dongle is NOT attached to the VM. You have to attach it.
    The two screenshots below give steps to attach the dongle (steps 1 to 7):

    [ATTACH=CONFIG]10859[/ATTACH][ATTACH=CONFIG]10860[/ATTACH]
    After this, https://forum.flightradar24.com/thre...l=1#post122373

    I questioned if the stick is wedging and going offline. As it seems to work, then not. So he reinstalled to try 'fix' and made things worse

    Leave a comment:


  • abcd567
    replied
    Originally posted by arash View Post
    Hi

    on the usb panel on dashboard, the red circle flashes and the connection between the dongles and the operating system is not established, like this:

    [ATTACH=CONFIG]10827[/ATTACH]

    & when in type fr24feed-status, i got this massage:

    Receiver:down ... failed

    fr24MLAT : not running ....failed
    Possibly your Dongle is NOT attached to the VM. You have to attach it.
    The two screenshots below give steps to attach the dongle (steps 1 to 7):

    VM USB -1.pngVM USB -2.png

    Leave a comment:


  • abcd567
    replied
    .


    Is My DVB-T RTL SDR Dongle Healthy?

    .

    Leave a comment:


  • Oblivian
    replied
    Originally posted by arash View Post
    Hi

    on the usb panel on dashboard, the red circle flashes and the connection between the dongles and the operating system is not established, like this:

    [ATTACH=CONFIG]10827[/ATTACH]

    & when in type fr24feed-status, i got this massage:

    Receiver:down ... failed

    fr24MLAT : not running ....failed
    Your original said it works fine and then does that? If so, software can't fix this. Your stick is going faulty and windows can't see it anymore

    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • arash
    replied
    Hi

    on the usb panel on dashboard, the red circle flashes and the connection between the dongles and the operating system is not established, like this:

    Untitled.jpg

    & when in type fr24feed-status, i got this massage:

    Receiver:down ... failed

    fr24MLAT : not running ....failed
    Last edited by arash; 2019-06-24, 20:12.

    Leave a comment:


  • wiedehopf
    replied
    For the logs to work properly you might need to do this:

    sudo chown fr24 /var/log/fr24feed

    That way fr24feed can write to that directory.
    But if you don't need the logs anyway it doesn't matter.

    Leave a comment:


  • arash
    replied
    Originally posted by wiedehopf View Post
    It's very confusing, in the 2nd picture you posted, the package in question is being downloaded.

    So i'm not sure how it could be not working?
    Maybe try

    sudo apt clean

    Then try the install again.
    Thank you for help

    Leave a comment:


  • arash
    replied
    Originally posted by abcd567 View Post
    Code:
    sudo mkdir /var/log/fr24feed
    Thank you

    fr24feed was set

    Leave a comment:


  • abcd567
    replied
    Code:
    sudo mkdir /var/log/fr24feed
    Last edited by abcd567; 2019-06-23, 22:44.

    Leave a comment:


  • abcd567
    replied
    Alternate download sites:

    Code:
    wget -O ~/gcc-6-base_6.3.0-18+deb9u1_armhf.deb http://ftp.debian.org/debian/pool/main/g/gcc-6/gcc-6-base_6.3.0-18+deb9u1_armhf.deb
    
    
    wget -O ~/gcc-6-base_6.3.0-18+deb9u1_armhf.deb  http://ftp.ca.debian.org/debian/pool/main/g/gcc-6/gcc-6-base_6.3.0-18+deb9u1_armhf.deb
    
    
    wget -O ~/gcc-6-base_6.3.0-18+deb9u1_armhf.deb  http://ftp.br.debian.org/debian/pool/main/g/gcc-6/gcc-6-base_6.3.0-18+deb9u1_armhf.deb

    Leave a comment:


  • arash
    replied
    Originally posted by wiedehopf View Post
    It should work. Maybe you mistyped something?

    Code:
    sudo apt install gcc-6-base:armhf
    After the
    sudo apt update
    the package should be found.

    So sudo apt update worked fine this time? (no "unable to resolve" like on the picture?)
    Amazing! it's work!!!

    so when I want to config fr24feed, at 6A step, i got this error!

    path /var/log/fr24feed is no accessible, please enter correct path!

    I enter the correct path for 10 times but its not working.

    Leave a comment:


  • abcd567
    replied
    Code:
    wget -O ~/gcc-6-base_6.3.0-18+deb9u1_armhf.deb   http://ftp.us.debian.org/debian/pool/main/g/gcc-6/gcc-6-base_6.3.0-18+deb9u1_armhf.deb  
    
    cd ~/
    
    sudo dpkg -i  gcc-6-base_6.3.0-18+deb9u1_armhf.deb

    Leave a comment:

Working...
X