Announcement
Collapse
No announcement yet.
Windows Setup/Feed Migration (virtualVM) Assistance
Collapse
X
-
-
Seems your dump1090 is NOT working as fr24 is continously giving this message: "could not connect to tcp 127.0.0.1 30005".
In browser of your computer (on which dump1090 and fr24feed are installed), type following and press Enter key, and wait for 30 seconds:
127.0.0.1:30005
Do you see any output?
.
Comment
-
This confirms the dump1090 on this computer is either not installed, OR if installed, is not working.
Which one have you installed, dump1090-mutability or dump1090-fa? Give following two commands and post their output.
apt-cache policy dump1090-mutability
apt-cache policy dump1090-fa
.Last edited by abcd567; 2021-09-30, 23:10.
Comment
-
(1) Do you see a map at this address on the computer on which you have installed dump1090-mutability?
localhost/dump1090/gmap.html
If you see, is the map empty or show aircraft?
(2) Did you issue these commands after installing dump1090-mutability?
Even if you did, do it againn:
Code:sudo usermod -a -G plugdev dump1090 sudo systemctl restart dump1090-mutability
Comment
-
Check if dump1090-mutability is working ok by giving following command. Please also post output of this command.
Code:sudo systemctl status dump1090-mutability
Also check if your dongle is healthy by following commands, and post last command's output.
Code:sudo apt-get install rtl-sdr sudo systemctl stop dump1090-mutability rtl_test -t
Comment
Comment