Originally posted by wiedehopf
View Post
Announcement
Collapse
No announcement yet.
Problem running feeder on RaspberryPI
Collapse
X
-
Originally posted by bar182 View Postis there any way I can see the aircraft list in the terminal?
Thanks for the help!
This should show you a map with aircraft.
Leave a comment:
-
It looks like it was working, this is why I got this error
[ ok ] FR24 Feeder/Decoder Process: running.
[ ok ] FR24 Stats Timestamp: 2019-03-23 19:18:18.
[ ok ] FR24 Link: connected [UDP].
[ ok ] FR24 Radar: T-LLSD4.
[ ok ] FR24 Tracked AC: 5.
[ ok ] Receiver: connected (3723 MSGS/0 SYNC).
[ ok ] FR24 MLAT: ok [UDP].
[ ok ] FR24 MLAT AC seen: 3.
is there any way I can see the aircraft list in the terminal?
Thanks for the help!Last edited by bar182; 2019-03-23, 19:28.
Leave a comment:
-
yeah what command did you run to get that error?
normally fr24feed starts by itself in the background.
if you start it manually you get that error because the dongle is already in use.
what does the command:
fr24feed-status
give as output?
Leave a comment:
-
Originally posted by wiedehopf View Postwhere did you get that error, in the fr24feed log?
anyway please share your configuration, it is shown with the following command (please replace the key with xxxxxx):
cat /etc/fr24feed.ini
and the confing:
receiver="dvbt"
fr24key="xxxxxxxx"
bs="no"
raw="no"
logmode="0"
logpath="/var/log/fr24feed"
mlat="yes"
mlat-without-gps="yes"
Leave a comment:
-
Problem running feeder on RaspberryPI
Hello,
due to the discontinue of the windows feeder i bought Raspberry PI
after clean new install with only the fr24feed using the FR24 website
i get error:
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
usb_claim_interface error -6
Error opening the RTLSDR device: Device or resource busy
Bus 001 Device 006: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-TTags: None
Leave a comment: