Hey,
I'm trying to set up FR on my windows 10 machine and the errors I'm getting seem to point towards a dead dongle.
First of all I'm using this dongle: ADS-B USB Dongle (R820T2) from JetVision, plugged into USB 2 on my motherboard, also had the same issues when plugged into a powered USB 3 hub and directly into a Rasberry Pi.
These are the errors/issues:
Zadig
Dongle shows up as
instead of the expected Bulk Device and driver installation fails.
fr24feed
Loads the software okay but then repeats this error message:
The web page setup doesn't seem to show any errors:
chrome_2019-01-27_13-48-08.png
chrome_2019-01-27_13-48-22.jpg
I have also tried using the dongle on a Raspberry Pi 3b+ with both the pi24 image and Rasbian Stretch Lite following steps on the forum but cannot get any results there either.
Do these signs point towards a dead dongle or am I missing something in my set up.
I have search the forums and generally on the internet but couldn't find anything that fixed these issues.
Any ideas? Thanks!
I'm trying to set up FR on my windows 10 machine and the errors I'm getting seem to point towards a dead dongle.
First of all I'm using this dongle: ADS-B USB Dongle (R820T2) from JetVision, plugged into USB 2 on my motherboard, also had the same issues when plugged into a powered USB 3 hub and directly into a Rasberry Pi.
These are the errors/issues:
Zadig
Dongle shows up as
Code:
Unknown USB Device (Device Descriptor Request Failed)
fr24feed
Loads the software okay but then repeats this error message:
Code:
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --net-http-port 8080 --raw) [reader][i]Connected to the receiver, configuring [reader][i]Configured, processing messages [reader][i]Connection terminated
chrome_2019-01-27_13-48-08.png
chrome_2019-01-27_13-48-22.jpg
I have also tried using the dongle on a Raspberry Pi 3b+ with both the pi24 image and Rasbian Stretch Lite following steps on the forum but cannot get any results there either.
Do these signs point towards a dead dongle or am I missing something in my set up.
I have search the forums and generally on the internet but couldn't find anything that fixed these issues.
Any ideas? Thanks!
Comment