Announcement

Collapse
No announcement yet.

Receiver is online but not sending any data

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fred0815
    replied
    Hi, i wanted to share my data, but i had this error too.
    Code:
    [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --raw)
    [reader][i]Connected to the receiver, configuring
    [reader][i]Configured, processing messages
    [reader][i]Connection terminated
    [main][i]Terminating child process 806 with SIGTERM[/COLOR]
    There was missing path="/usr/lib/fr24/dump1090" in /etc/fr24feed.ini
    and a missing symbolic link in /usr/lib/fr24 from @dump1090 to /usr/bin/dump1090-mutability
    Fixed that and reinstalled fr24feed, than it was linking correct, now it is working:
    Linking /usr/bin/dump1090-mutability to /usr/lib/fr24/dump1090

    Leave a comment:


  • wiedehopf
    replied
    Try adding these two lines

    use-http=yes
    http-timeout=20

    to /etc/fr24feed.ini

    also if the log is enabled you can check /var/log/fr24feed.log for errors.

    Leave a comment:


  • dakky
    replied
    I just noticed my subscription went to Basic and then checked the feed and it says the same, Receiver is online but it's not sending data. On the same Raspberry and the same USB dongle there is also a Flightaware feeder which still normally works and sends data to FA. So something must have gone bad with fr24feed ? Did you guys solve that error?

    Leave a comment:


  • Oblivian
    replied
    Originally posted by Icosphere
    2019-01-27 13:10:58 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --raw)
    2019-01-27 13:10:58 | [reader][i]Connected to the receiver, configuring
    2019-01-27 13:10:58 | [reader][i]Configured, processing messages
    2019-01-27 13:10:59 | [reader][i]Connection terminated
    2019-01-27 13:10:59 | [main][i]Terminating child process 806 with SIGTERM


    Any idea what I need to do to enable the receiver?
    https://forum.flightradar24.com/thre...ll=1#post74834

    Code:
    Code:
    2016-01-26 22:20:05 | [reader][i]Connecting to Generic receiver via (exe://*dump1090*  --raw)
    2016-01-26 22:20:05 | [reader][i]Connected to the receiver, authenticating
    2016-01-26 22:20:05 | [reader][i]Authenticated, processing messages
    2016-01-26 22:20:07 | [reader][i]Connection terminated
    2016-01-26 22:20:12 | [reader][i]Connecting to Generic receiver via (exe://*dump1090*  --raw)
    2016-01-26 22:20:12 | [reader][i]Connected to the receiver, authenticating
    2016-01-26 22:20:12 | [reader][i]Authenticated, processing messages
    2016-01-26 22:20:14 | [reader][i]Connection terminated
    Incorrect configuration set - Hardware not starting. Check for:
    - USB stick does NOT have the required Realtek RTL28xx chipset or Rafael Tuner
    - Conflicting software locking USB device to 'in-use'
    - Missing zadig driver installation step for windows (cannot read USB devices)
    - Error with additional commands causing Dump1090 to terminate
    - Dump1090 (or similar) already currently running
    - Windows detected and using wrong USB. Add: --device-index x
    I would suggest stopping all instances of fr24feed using the commands on that post.

    And run RTL_test to ensure it has the right tuner/detected and not already in use for a start.

    Leave a comment:


  • ylis
    replied
    ... and he drinks lots of Coke too !! Requirement for more cantenna's ....

    Leave a comment:


  • abcd567
    replied
    Originally posted by PeterWelly View Post
    Looking at the images posted by ABCD567, if he can get traffic on a biscuit tin.....
    I love biscuits.

    Leave a comment:


  • wiedehopf
    replied
    Originally posted by PeterWelly View Post
    Just so confusing why I can't see anything?

    Looking at the images posted by ABCD567, if e can get traffic on a biscuit tin, where i am going wrong with the antenna outside with clear view and under the flight path.
    Most likely your antenna wire broke. Or the dongle could have been damaged by electrostatic discharge as well. Antenna wire seems more likely.
    Those antennas are very flimsy.

    Or you could have very strong interference / noise in the area (mobile tower / TV broadcast or something like that)

    The configuration looks normal for the default fr24 installation. If you wanted to use mutability 1.15 then you didn't quite do it correctly but you should still receive something. (but you would have the old google map which doesn't work properly anmore, it shouldn't be a problem with receiving aircraft thought)

    Post the output of this command please:
    cat /run/dump1090*/stats.json | grep total
    Last edited by wiedehopf; 2019-01-20, 12:27.

    Leave a comment:


  • PeterWelly
    replied
    OK, thanks.

    Leave a comment:


  • Oblivian
    replied
    No. 0.0.0.0 means open port on all interfaces.

    That's the web admin page starting.

    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • PeterWelly
    replied
    Sorry to keep posting more things, just trying to work things out.

    In the Log below it references the server as 0.0.0.0:8754.

    Am I missing something. Should there be an actual IP address here? I have highlighted it in red below.

    This log is after I moved the antenna to the roof and rebooted the Pi.


    pi@raspberrypi:~ $ cat /var/log/fr24feed/fr24feed.log
    2019-01-19 06:50:50 | ______ _ _ _ _ _ _____ ___
    2019-01-19 06:50:50 | | ___|| |(_) | | | | | | / __ \ / |
    2019-01-19 06:50:50 | | |_ | | _ __ _ | |__ | |_ _ __ __ _ __| | __ _ _ __`' / /' / /| |
    2019-01-19 06:50:50 | | _| | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / / / /_| |
    2019-01-19 06:50:50 | | | | || || (_| || | | || |_ | | | (_| || (_| || (_| || | ./ /___\___ |
    2019-01-19 06:50:50 | \_| |_||_| \__, ||_| |_| \__||_| \__,_| \__,_| \__,_||_| \_____/ |_/
    2019-01-19 06:50:50 | __/ |
    2019-01-19 06:50:50 | |___/
    2019-01-19 06:50:50 | [main][i]FR24 Feeder/Decoder
    2019-01-19 06:50:50 | [main][i]Version: 1.0.23-8/generic
    2019-01-19 06:50:50 | [main][i]Built on Oct 11 2018 18:27:28 (HEAD-3c696a7.git/Linux/static_armel)
    2019-01-19 06:50:50 | [main][i]Running on: pi24-raspbian9
    2019-01-19 06:50:50 | [main][i]Local IP(s): 192.168.0.7
    2019-01-19 06:50:50 | [main][i]Copyright 2012-2018 Flightradar24 AB
    2019-01-19 06:50:50 | [main][i]https://www.flightradar24.com
    2019-01-19 06:50:50 | [main][i]DNS mode: PING
    2019-01-19 06:50:50 | [main][i]Automatic updates are ENABLED
    2019-01-19 06:50:50 | ERROR: rmmod: ERROR: Module dvb_usb_rtl28xxu is not currently loaded
    2019-01-19 06:50:50 | [httpd][i]Server started, listening on 0.0.0.0:8754
    2019-01-19 06:50:50 | [main][i]Reader thread started
    2019-01-19 06:50:50 | [reader][i]Initializing reader
    2019-01-19 06:50:50 | [main][i]Socket server started
    2019-01-19 06:50:50 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --raw --mlat)
    2019-01-19 06:50:50 | [main][i]MLAT data feed started
    2019-01-19 06:50:50 | [reader][i]Connected to the receiver, configuring
    2019-01-19 06:50:50 | [reader][i]Configured, processing messages
    2019-01-19 06:50:50 | [bs][i]Initializing server
    2019-01-19 06:50:50 | [bs][i]Starting server on 0.0.0.0:30003
    2019-01-19 06:50:50 | [master][i]Starting processing thread
    2019-01-19 06:50:50 | [mlat][i]Waiting for MLAT configuration
    2019-01-19 06:50:51 | [time][i]Synchronizing time via NTP
    2019-01-20 02:43:52 | [time][i]Time synchronized correctly, offset +26831.0587 seconds
    2019-01-20 02:43:52 | [main][i]Feed Network client started
    2019-01-20 02:43:52 | [feed][i]Downloading configuration
    2019-01-20 02:43:52 | [feed][d]fetching configuration
    2019-01-20 02:43:53 | [feed][i]configuring decoder
    2019-01-20 02:43:53 | [feed][c]Max range AIR: 350.0nm
    2019-01-20 02:43:53 | [feed][c]Max range GND: 100.0nm
    2019-01-20 02:43:53 | [stats][i]Stats thread started
    2019-01-20 02:43:53 | [feed][i]configuration changed
    2019-01-20 02:43:53 | [feed][i]defined 3 servers
    2019-01-20 02:43:53 | [feed][c]Timestamps: optional
    2019-01-20 02:43:53 | [feed][n]YBBN214@185.218.24.22:8099/UDP
    2019-01-20 02:43:53 | [feed][n]connecting
    2019-01-20 02:43:53 | info | Stopping ReceiverACSender threads for feed
    2019-01-20 02:43:53 | info | Configured ReceiverACSender: 185.218.24.22:8099,185.218.24.23:8099,185.218.24.2 4:8099, feed: YBBN214, send_interval: 5s, max age: 15s, send metadata: true, mode: 1, filtering: true
    2019-01-20 02:43:53 | info | Network thread connecting to 185.218.24.22:8099 for feed YBBN214
    2019-01-20 02:43:53 | [feed][n]connected via UDP (fd 16)
    2019-01-20 02:43:53 | [feed][i]Feed connected
    2019-01-20 02:43:53 | [feed][n]working
    2019-01-20 02:44:23 | [feed][n]ping 1
    2019-01-20 02:44:24 | [feed][n]syncing stream result: 1
    2019-01-20 02:44:31 | [reader][w]Setting new UTC offset: 0!
    2019-01-20 02:44:33 | [mlat][i]MLAT configuration received, service ENABLED
    2019-01-20 02:44:33 | [mlat][i]Starting MLAT with preconfigured position: -27.26,152.96,18.0
    2019-01-20 02:44:33 | [mlat][i]MLAT bandwidth reduction active, level 1
    2019-01-20 02:44:33 | [mlat][i]Configuring UDP connection udp://australia.fr24.com:19788
    2019-01-20 02:44:43 | [mlat][i]Registering MLAT station
    2019-01-20 02:44:43 | [mlat][i]Registering MLAT station: SUCCESS
    2019-01-20 02:44:45 | [mlat][i]No ADS-B time reference available (0/0)
    2019-01-20 02:44:45 | [mlat][i]Pinging the server
    2019-01-20 02:44:45 | [mlat][i]Stats 0/0
    2019-01-20 02:44:53 | [feed][n]ping 2
    2019-01-20 02:44:54 | [feed][n]syncing stream result: 1
    2019-01-20 02:44:55 | [mlat][i]No ADS-B time reference available (0/0)
    2019-01-20 02:45:04 | [mlat][i]No ADS-B time reference available (0/0)

    Leave a comment:


  • PeterWelly
    replied
    Not sure if everything in the list is correct. Should there be something in HOST/IP ?

    Screen Shot 01-20-19 at 12.48 PM.jpg

    I am also directly under the flight path. In the screen shot below, the VA flight is directly above my house but I can't see it on my tracking list.

    Screen Shot 01-20-19 at 12.53 PM.jpg

    Screen Shot 01-20-19 at 12.52 PM.jpg

    Just so confusing why I can't see anything?

    Looking at the images posted by ABCD567, if e can get traffic on a biscuit tin, where i am going wrong with the antenna outside with clear view and under the flight path.
    Last edited by PeterWelly; 2019-01-20, 02:58.

    Leave a comment:


  • PeterWelly
    replied
    Result of cat /etc/fr24feed.ini

    pi@raspberrypi:~ $ cat /etc/fr24feed.ini
    receiver="dvbt"
    fr24key="my-key"
    path="/usr/lib/fr24/dump1090"
    bs="yes"
    raw="no"
    logmode="2"
    windowmode="0"
    logpath="/var/log/fr24feed"
    mpx="no"
    mlat="yes"
    mlat-without-gps="yes"
    pi@raspberrypi:~ $

    Leave a comment:


  • PeterWelly
    replied
    I have managed to move the antenna onto the roof itself, keeping the cable short. The Pi is just inside the window.


    2019-01-20 12.02.42 (Medium).jpg
    Last edited by PeterWelly; 2019-01-20, 02:47.

    Leave a comment:


  • PeterWelly
    replied
    Here is my setup.2019-01-20 10.50.16 (Medium).jpg2019-01-20 10.51.22 (Medium).jpg

    Leave a comment:


  • abcd567
    replied
    Originally posted by PeterWelly View Post
    The Antenna is just the small mag base one that came with the tuner. It is located on the roof with the no extension leads etc. Ant and tuner are both only 2 weeks old so connections are good.
    Place antenna over a food can or metal sheet. This will:
    (1) Improve reception.
    (2) Help keeping antenna stable and upright, as the magnet in its base will cling to iron/steel of food can




    Leave a comment:

Working...
X