Announcement

Collapse
No announcement yet.

Restart FR24 after RaspPi reboot

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Restart FR24 after RaspPi reboot

    I had to restart my RaspPi and now it's not feeding FR24. Do just use: "sudo service fr24feed start" to get it running again?
    Is there a command I can insert somewhere to have it auto-start? I feed FA, FR24, and RB24. FA seems to restart automatically.

    Thanks!

    Jason



    #2
    Checked it.. it's not working

    Here is the error message: "Could not connect to tcp://localhost:30005"

    I installed Raspian, then PiAware, then dump1090 (per FA instructions), then FR24, and this is the error.

    Flight aware is working fine.






    Originally posted by port107
    Thank you! I got it.

    Jason

    Comment


      #3
      Originally posted by port107 View Post
      Here is the error message: "Could not connect to tcp://localhost:30005"

      I installed Raspian, then PiAware, then dump1090 (per FA instructions), then FR24, and this is the error.

      Flight aware is working fine.
      Step-1:
      In your Browser's address bar type
      ip-of-pi:8754/settings.html
      and press Enter key. This will open FR24 Settings page.

      Step-2:
      On the Settings page opend in step-1, set
      Reciever = AVR (TCP)
      Host/IP = 127.0.0.1:30002

      Step-3
      Click "Save" button first, then click "Restart" button, and wait few minutes. Both the "Save" and "Restart" buttons are at bottom-right of the settings page.

      FR24 settings avr-tcp.png

      .

      Comment


        #4
        As above. New coding means 'localhost' is not recognised on all installs without some adjustments.

        If another feeder is present and dump1090 already working, Replace with the localhost 127.0.0.1 per multi-feeder install best practice

        Cleaned up and closing to lessen number of threads people reference for help
        Posts not to be taken as official support representation - Just a helpful uploader who tinkers

        Comment

        Working...
        X