Announcement

Collapse
No announcement yet.

Feed stats show off line after upgrade to 19.2 and 19.5 update?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Deker24
    replied
    I've made a fresh install,
    Completed the sudo fr24feed --signup with my existing sharing key, re-entered long/lat and email addy etc.
    .....192.168.1.2:8754/ fails "site cant be reached"
    service fr24feed status shown active.
    online feed-stats status still shows off line.

    Loosing the will to live now :-(


    pi@raspberrypi:~ $ service fr24feed status
    ● fr24feed.service - LSB: Flightradar24 Decoder & Feeder
    Loaded: loaded (/etc/init.d/fr24feed)
    Active: active (exited) since Sat 2018-01-20 17:17:20 UTC; 1h 29min ago
    Process: 512 ExecStart=/etc/init.d/fr24feed start (code=exited, status=0/SUCCE SS)

    Leave a comment:


  • Deker24
    replied
    Thanks for the pointers Obliv'
    I've been at it for hours now and was stuck so thought it time for specific help which you have kindly provided.

    Deker.

    Leave a comment:


  • Oblivian
    replied
    Please when asking for assistance check for current threads rather than start a new one.

    You can see there are many people with similar issues with new versions that are being worked on actively.

    The easiest method is wipe the device and start again using rspberry pi's instructions.

    Or if you are able to follow and Know how to fix basic issues full reinstall

    https://forum.flightradar24.com/thre...l=1#post100095

    https://forum.flightradar24.com/thre...erry-Pi/page83

    Leave a comment:


  • Feed stats show off line after upgrade to 19.2 and 19.5 update?

    Hi,

    My PiZero operating OK for months,
    Been having problem last few days with feeds status showing offline at flightradar24.com/account/feed-stats
    Understand this was due to faulty 19.2 update.

    Pi has done an automatic update to 19.5...still offline.
    Powered off/on.
    Stuck now and don't know how to fix being a linux and fr24 numpty.
    Would appreciate any help,
    Interestingly, the feed status bar chart does show that it went on line for about an our earlier this morning by itself, then went offline again.
    Thanks.

    SSH into pi shows:-

    ● fr24feed.service - Flightradar24 Decoder & Feeder
    Loaded: loaded (/etc/systemd/system/fr24feed.service; disabled)
    Active: active (running) since Sat 2018-01-20 10:42:52 UTC; 10min ago
    Process: 572 ExecStartPre=/bin/chmod a+rwx /var/log/lighttpd (code=exited, status=0/SUCCESS)
    Process: 569 ExecStartPre=/bin/chown -R nobody:nogroup /run/dump1090-mutability /var/log/fr24feed /run/fr24feed /dev/shm/decoder.txt (code=exited, status=0/SUCCESS)
    Process: 566 ExecStartPre=/bin/touch /dev/shm/decoder.txt (code=exited, status=0/SUCCESS)
    Process: 563 ExecStartPre=/bin/mkdir -p /run/dump1090-mutability /var/log/fr24feed /run/fr24feed /var/log/lighttpd (code=exited, status=0/SUCCESS)
    Process: 559 ExecStartPre=/usr/lib/fr24/install_dump1090.sh (code=exited, status=0/SUCCESS)
    Main PID: 575 (fr24feed)
    CGroup: /system.slice/fr24feed.service
    └─575 /usr/bin/fr24feed

    Flightradar24 Feeder/Decoder
    Linux/generic/static_arm/1.0.19-5
    Updated: 10:53:27 GMT+0000 (GMT Standard Time)
    FR24 Link: Connected via UDP
    FR24 Radar Code: T-EGUA13
    Aircraft Tracked (ModeS & ADS-B): 0
    Aircraft Uploaded: N/A
    Receiver: avr-tcp, Connected
    MLAT running: NO
    Actions:
    Settings
    Restart software
    Terminate software
    Show tracked aircraft list
    Show status variables (*)

    ac_map_size="3072"
    build_arch="static_arm"
    build_flavour="generic"
    build_os="Linux"
    build_revision="T201801191038"
    build_timetamp="Jan 19 2018 10:38:52"
    build_version="1.0.19-5"
    cfg_baudrate=""
    cfg_bs="no"
    cfg_host="localhost:30002"
    cfg_mpx="no"
    cfg_path=""
    cfg_raw="no"
    cfg_receiver="avr-tcp"
    cfg_windowmode="0"
    d11_map_size="0"
    feed_alias="T-EGUA13"
    feed_configured_mode="UDP"
    feed_current_mode="UDP"
    feed_current_server="83.140.21.87"
    feed_last_attempt_time="1516445383"
    feed_last_config_attempt="1516445014"
    feed_last_config_info=""
    feed_last_config_result="success"
    feed_last_connected_time="1516445383"
    feed_last_disconnected_time="1516445375"
    feed_status="connected"
    feed_status_message=""
    fr24key="f82c75cf8ca7ad54"
    last_json_utc="1516445573"
    last_rx_connect_status="E1"
    mlat-ok="NO"
    mlat-started="YES"
    mlat_problem="no-config"
    msg_ring_full="0"
    msg_ring_length="0"
    offline-mode="no"
    rx_connected="0"
    shutdown="no"
    time_update_utc="1516445562"
    time_update_utc_s="2018-01-20 10:52:42"
    timing_is_valid="1"
    timing_last_drift="-0.0001"
    timing_last_offset="-0.0001"
    timing_last_result="success"
    timing_source="NTP"
    timing_time_last_attempt="1516445014"
    timing_time_last_success="1516445014"
    timing_time_since_last_success="1516445014"
    Last edited by Deker24; 2018-01-20, 11:11.
Working...
X