Announcement

Collapse
No announcement yet.

Archived: Feed issues with 19-2

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • raffav
    replied
    @abcd567

    i have checked it all the same

    Leave a comment:


  • raffav
    replied
    Thanks
    Tomorrow will get the version
    Now I inserted SD with rasbPBX(freepbx for raspberry) to work on voip
    I am using the script and still getting the error but I am online on site, and getting planes

    Enviado de meu XT1580 usando Tapatalk

    Leave a comment:


  • abcd567
    replied
    @raffav

    Just to replicate your case, I did following:

    1. Formatted microSD card

    2. Downloaded Raspbian Stretch Lite image (2017-11-29-raspbian-stretch-lite.img)
    https://downloads.raspberrypi.org/raspbian_lite_latest

    3. Wrote (2017-11-29-raspbian-stretch-lite.img) on microSD card.

    4. Ran bash script: sudo bash -c "$(wget -O - https://repo-feed.flightradar24.com/install_fr24_rpi.sh)"

    5. During signup provided email, fr24 sharing key, latitude & longitude etc

    6. During configuration selected option "1. DVB-T".

    7. Restarted fr24feed by sudo systemctl restart fr24feed

    This is what I got:

    At ip-of-pi:8754
    FR24FEED On Stretch With Dump Mut 1.14.png


    In SSH terminal
    FR24FEED On Stretch With Dump Mut 1.14 - B.png
    Last edited by abcd567; 2018-02-11, 05:47.

    Leave a comment:


  • abcd567
    replied
    Originally posted by raffav
    Raspberry last version, and last version of fr24feed too

    Enviado de meu XT1580 usando Tapatalk
    1. Which one you have?
    Raspbin Stretch Lite (2017-11-29-raspbian-stretch-lite.img)
    OR
    Raspbian Stretch Desktop (2017-11-29-raspbian-stretch.img)


    2. Did you install FR24 by this script?
    sudo bash -c "$(wget -O - https://repo-feed.flightradar24.com/install_fr24_rpi.sh)"

    3. In ADDITION to above, have you installed any decoder such as dump1090-mutability or dump1090-fa?

    .
    Last edited by abcd567; 2018-02-11, 04:22.

    Leave a comment:


  • raffav
    replied
    Hello
    i am new on the forum already tried to find a solution but nothing worked
    i am getting this error


    Found 1 device(s):
    0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
    usb_claim_interface error -6
    Error opening the RTLSDR device: Device or resource busy

    Leave a comment:


  • fr24-pad
    replied
    The script is my own and "fr24-fix" is a directory I created to hold the good copies of my config files.

    Leave a comment:


  • abcd567
    replied
    @fr24-pad

    Cannot find fr24-fix in my Pi.

    Leave a comment:


  • fr24-pad
    replied
    fr24feed_updater.sh is the worst idea ever, I prefer safe-fr24-install:

    #!/bin/bash

    BASE="$HOME/fr24-fix"
    DATE=`date +%Y%m%d`

    # install latest version of fr24
    sudo apt-get install fr24feed

    # stop fr24
    sudo service fr24feed stop

    # replace fr24feed.service with a clean version
    sudo cp /etc/systemd/system/fr24feed.service $BASE/fr24feed.service-dist-$DATE
    sudo cp $BASE/fr24feed.service-lgp /etc/systemd/system/fr24feed.service
    sudo systemctl daemon-reload

    # replace fr24feed.ini with a clean version
    sudo cp /etc/fr24feed.ini $BASE/fr24feed.ini-dist-$DATE
    sudo cp $BASE/fr24feed.ini-lgp /etc/fr24feed.ini

    # remove fr24feed_updater crontab
    sudo rm /etc/cron.d/fr24feed_updater

    # never execute fr24 update scripts
    sudo chmod 0 /usr/lib/fr24/fr24feed_updater.sh
    sudo chmod 0 /usr/lib/fr24/install_dump1090.sh
    sudo chmod 0 /usr/lib/fr24/unregister_kernel_modules.sh
    sudo chmod 0 /usr/lib/fr24/create_missing_directories.sh
    sudo chmod 0 /usr/lib/fr24/dump_diagnostics.sh

    # remove extraneous directories created by fr24
    sudo rm -fr /run/dump1090-mutability

    # start fr24
    sudo service fr24feed start

    Leave a comment:


  • AndreasWarby
    replied
    Today's auto-upgrade from 1.0.19-13 to 1.0.19-15 gave me a working fr24feed, even after a reboot; however,
    errors were reported during the install. See below:

    $ cat /var/log/apt/history.log
    Start-Date: 2018-02-07 07:00:40
    Commandline: apt-get -o Dpkg::Options::=--force-confdef -o Dpkg::Options::=--force-confold install -y fr24feed
    Upgrade: fr24feed:armhf (1.0.19-13, 1.0.19-15)
    End-Date: 2018-02-07 07:00:44

    $ cat /var/log/apt/history.log
    /usr/lib/fr24/fr24feed_updater.sh: line 8: /dev/mmcblk0p2: Permission denied
    Get:1 http://archive.raspberrypi.org/debian stretch InRelease [25.3 kB]
    Hit:2 http://flightaware.com/adsb/piaware/files/packages jessie InRelease
    Hit:3 https://opensky-network.org/repos/debian opensky InRelease
    Get:4 http://repo.feed.flightradar24.com flightradar24 InRelease [13.0 kB]
    Get:5 http://archive.raspberrypi.org/debian stretch/main armhf Packages [139 kB]
    Get:6 http://mirrordirector.raspbian.org/raspbian stretch InRelease [15.0 kB]
    Get:7 http://repo.feed.flightradar24.com flightradar24/raspberrypi-stable armhf Packages [605 B]
    Hit:8 https://apt.rb24.com rpi-stable InRelease
    Fetched 193 kB in 16s (11.5 kB/s)
    Reading package lists...
    Installed version: 1.0.19-13
    Latest available: 1.0.19-15
    Upgrading fr24feed from 1.0.19-13 to 1.0.19-15...
    Waiting for fr24feed to stop completely...
    dpkg: error processing package fr24feed (--configure):
    package fr24feed is already installed and configured
    Errors were encountered while processing:
    fr24feed
    Reading package lists...
    Building dependency tree...
    Reading state information...
    The following packages will be upgraded:
    fr24feed
    1 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
    Need to get 1,214 kB of archives.
    After this operation, 0 B of additional disk space will be used.
    Get:1 http://repo.feed.flightradar24.com flightradar24/raspberrypi-stable armhf fr24feed armhf 1.0.19-15 [1,214 kB]
    apt-listchanges: Reading changelogs...
    debconf: unable to initialize frontend: Dialog
    debconf: (TERM is not set, so the dialog frontend is not usable.)
    debconf: falling back to frontend: Readline
    debconf: unable to initialize frontend: Readline
    debconf: (This frontend requires a controlling tty.)
    debconf: falling back to frontend: Teletype
    dpkg-preconfigure: unable to re-open stdin:
    Fetched 1,214 kB in 1s (679 kB/s)
    (Reading database ... 48667 files and directories currently installed.)
    Preparing to unpack .../fr24feed_1.0.19-15_armhf.deb ...
    Unpacking fr24feed (1.0.19-15) over (1.0.19-13) ...
    Setting up fr24feed (1.0.19-15) ...
    useradd: user 'fr24' already exists
    mount: / is busy

    Leave a comment:


  • abcd567
    replied
    Upgrade: ver 1.0.19-13 >>> 1.0.19-15 - ALL OK

    pi@raspberrypi:~ $ cd /usr/lib/fr24
    pi@raspberrypi:/usr/lib/fr24 $ sudo ./fr24feed_updater.sh
    ...................
    ...................
    Unpacking fr24feed (1.0.19-15) over (1.0.19-13) ...
    Setting up fr24feed (1.0.19-15) ...
    Linking /usr/bin/dump1090-mutability to /usr/lib/fr24/dump1090
    useradd: user 'fr24' already exists
    mount: / is busy


    pi@raspberrypi:~ $ apt-cache policy fr24feed
    fr24feed:
    Installed: 1.0.19-15
    Candidate: 1.0.19-15

    FR24 Auto-update 1.0.19-13 to 1.0.19-15.png

    pi@raspberrypi:~ $ fr24feed-status
    [ ok ] FR24 Feeder/Decoder Process: running.
    [ ok ] FR24 Stats Timestamp: 2018-02-07 09:44:26.
    [ ok ] FR24 Link: connected [UDP].
    [ ok ] FR24 Radar: T-CYYZ9.
    [ ok ] FR24 Tracked AC: 5.
    [ ok ] Receiver: connected (4247 MSGS/0 SYNC).
    [ ok ] FR24 MLAT: ok [UDP].
    [ ok ] FR24 MLAT AC seen: 4.


    pi@raspberrypi:~ $ sudo systemctl status piaware -l
    ● piaware.service - FlightAware ADS-B uploader
    Loaded: loaded (/lib/systemd/system/piaware.service; enabled; vendor preset: enabled)
    Active: active (running) since Wed 2018-02-07 04:20:19 EST; 27min ago
    ...................
    ...................
    Feb 07 04:40:56 raspberrypi piaware[450]: 582 msgs recv'd from dump1090-mutabi (104 in last 5m); 582 msgs sent to FlightAware
    Feb 07 04:45:56 raspberrypi piaware[450]: 624 msgs recv'd from dump1090-mutabi (42 in last 5m); 624 msgs sent to FlightAware

    Leave a comment:


  • R6502
    replied
    Hmmm, got an update from 1.0.19-13 to 1.0.19-15 2.5H ago.
    fr24feed_update.log show errors related to JVM:
    Error: missing `server' JVM at `/usr/lib/jvm/java-8-openjdk-armhf/jre/lib/arm/server/libjvm.so'.
    in fact 'server' directory is not present. Several other errors about java.
    At the end it says it's restarting current version of feeder (so should be 1.0.19-13) but :8754 shows new version 1.0.19-15
    see following image:
    1.0.19-15.jpg
    I'm correctly feeding, I rebooted and keep on feeding.

    EDIT: After checking logs, I'm 99% this problem isn't related to fr24 update. I was able to fix this error doing the following:
    sudo apt-get purge openjdk-8-jre-headless
    sudo apt-get install openjdk-8-jre-headless
    sudo apt-get install openjdk-8-jre

    I'm almost sure it comes from my installation of dump1090-tools from tedsluis.
    I ran automatic install and didn't realized some errors occured, even if the stats were showing correctly.
    Probably something wrong with Stretch, but it's beyond my knowledge.
    /EDIT

    Another thing: why each time there's an update my sharing state show 16 minutes not feeding, that's really a severe punition!!!
    I don't think the upgrade process need so much time, rebooting the Pi never show an interrupt.
    Last edited by R6502; 2018-02-07, 21:52. Reason: errors not related to fr24 update

    Leave a comment:


  • abcd567
    replied
    Originally posted by ylis View Post
    Auto Update 1.0.19-15 has just been installed on my RPi.
    Great!
    Hopefully my Pi has allso updated from 1.0.19-13 to 1.0.19-15. Will check when I return to home.

    Leave a comment:


  • ylis
    replied
    Yes. Tested using "sudo reboot" and "sudo shutdown -r now" as well as the restart option within settings.

    Leave a comment:


  • Oblivian
    replied
    Originally posted by ylis View Post
    Auto Update 1.0.19-15 has just been installed on my RPi.
    And does it keep going after reboot..

    Sent from my XT1092 using Tapatalk

    Leave a comment:


  • ylis
    replied
    Auto Update 1.0.19-15 has just been installed on my RPi.

    Leave a comment:

Working...
X