Announcement

Collapse
No announcement yet.

feed seems to stop working - Nooelec R820T2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DaveGoody
    replied
    Cheers Oblivian didn't know that it just straight into my Intel Nuc although that's powered via an extension cable shall see if I can get it powered from the wall.

    Leave a comment:


  • Oblivian
    replied
    Lack of data being uploaded. The server sends a kill command. As you are starting with only single contacts, it's either lacking signal or dropping off after the fact.

    If you aren't on a good power adaptor, or have added an extension cable it's a possible cause.

    Sent from my XT1092 using Tapatalk

    Leave a comment:


  • DaveGoody
    started a topic feed seems to stop working - Nooelec R820T2

    feed seems to stop working - Nooelec R820T2

    Morning all,

    Just after a bit of help I used to have my Nooelec R820T2 set up and working great but them I ran into a few problems and I kept getting a terminating error anyway I've installed everything and started again but I'm not sure whats happening now it seems to start ok and I've checked the app and it looks like the datas being received but then I've started getting "syncing stream result: 1 ping 1,2....." and I'm guessing this isn't a good thing as the status is shown offline. I'm using the feed on Windows 10. Any help would be great this is the log... if I need to supply more info let me know cheers

    Code:
    [main][i]FR24 Feeder/Decoder
    [main][i]Version: 1.0.18-9/generic
    [main][i]Built on Apr 21 2017 14:51:08 (???/Windows/i386)
    [main][i]Copyright 2012-2017 Flightradar24 AB
    [main][i]
    [main][i]Reader thread started
    [time][i]Synchronizing time via NTP
    [master][i]Starting processing thread
    [reader][i]Initializing reader
    [httpd][i]Server started, listening on 0.0.0.0:8754
    [reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe  --raw)
    [reader][i]Connected to the receiver, configuring
    [reader][i]Configured, processing messages
    [time][i]Time synchronized correctly, offset -2.0636 seconds
    [main][i]Feed Network client started
    [feed][i]Downloading configuration
    [feed][c]Interval: 5s
    [feed][c]Latitude: xxxxxx
    [feed][c]Longitude: xxxxxx
    [feed][c]GND: YES
    [feed][c]NonADSB: YES
    [feed][c]Timestamps: optional
    [feed][c]Max range AIR: 350.0nm
    [feed][c]Max range GND: 100.0nm
    [feed][i]defined 5 servers
    [stats][i]Stats thread started
    [feed][n]EG@xxxxxx
    [feed][n]connecting
    [feed][n]connected via UDP (fd 980)
    [feed][n]working
    [feed][n]ping 1
    [feed][n]syncing stream result: 1
    [feed][n]ping 2
    [feed][i]sent 1,0 AC
    [feed][n]syncing stream result: 1
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 2,0 AC
    [feed][i]sent 2,0 AC
    [feed][i]sent 2,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]filtering out 1 overlapping AC (saving bandwidth)
    [feed][i]sent 1,1 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,1 AC
    [feed][i]sent 1,1 AC
    [feed][i]sent 1,1 AC
    [feed][n]syncing stream async: 1
    [feed][n]syncing stream result: 1
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,1 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]filtering out 1 overlapping AC (saving bandwidth)
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][i]removed 1 of 2 AC
    [feed][i]sent 1,0 AC
    [feed][i]sent 1,0 AC
    [feed][n]ping 1
    [feed][n]syncing stream result: 1
    [feed][n]ping 2
    [feed][n]syncing stream result: 1
    [feed][n]ping 3
    [feed][n]syncing stream result: 1
    [feed][n]ping 4
    [feed][n]syncing stream result: 1
    [feed][n]ping 5
    [feed][n]syncing stream result: 1
    [feed][n]ping 6
    [feed][n]syncing stream result: 1
    [feed][n]ping 7
    [feed][n]syncing stream result: 1
    [feed][n]ping 8
    [feed][n]syncing stream result: 1
    [feed][n]ping 9
    [feed][n]syncing stream result: 1
    [feed][n]ping 10
    [feed][n]syncing stream result: 1
    [stats][e]Cached feed_id=15180 for network T
    [stats][i]sent 42 bytes
    [time][i]Synchronizing time via NTP
    [time][i]Time synchronized correctly, offset -2.0642 seconds
    [feed][n]ping 11
    [feed][n]syncing stream result: 1
    [feed][n]ping 12
    [feed][n]syncing stream result: 1
    [feed][n]ping 13
    [feed][n]syncing stream result: 1
    [feed][n]ping 14
    [feed][n]syncing stream result: 1
    [feed][n]ping 15
    [feed][n]syncing stream result: 1
    [feed][n]ping 16
    [feed][n]syncing stream result: 1
    [feed][n]ping 17
    [feed][n]syncing stream result: 1
    [feed][n]ping 18
    [feed][n]syncing stream result: 1
    [feed][n]ping 19
    [feed][n]syncing stream result: 1
    [feed][n]ping 20
    [feed][n]syncing stream result: 1
    [reader][w]Global timeout exceeded, 308 msgs, 0 resyncs, reconnecting
    [reader][i]Connection terminated
    [reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe  --raw)
    [reader][i]Connected to the receiver, configuring
    [reader][i]Configured, processing messages
    [feed][n]ping 21
    [feed][n]syncing stream result: 1
    [feed][n]ping 22
    [feed][n]syncing stream result: 1
    [feed][n]ping 23
    [feed][n]syncing stream result: 1
    [feed][n]ping 24
    [feed][n]syncing stream result: 1
    [feed][n]ping 25
    [feed][n]syncing stream result: 1
    [feed][n]ping 26
    [feed][n]syncing stream result: 1
    [feed][n]ping 27
    [feed][n]syncing stream result: 1
    [feed][n]ping 28
    [feed][n]syncing stream result: 1
Working...
X