Announcement

Collapse
No announcement yet.

Raspberry PI installation made too easy with extra feature.

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Oblivian
    replied
    Originally posted by fribse View Post

    May 19 18:01:07 raspberrypi systemd[1]: fr24feed.service holdoff time over, ....
    May 19 18:01:07 raspberrypi systemd[1]: Stopping Flightradar24 Decoder & Fee....
    May 19 18:01:07 raspberrypi systemd[1]: Starting Flightradar24 Decoder & Fee....
    May 19 18:01:07 raspberrypi systemd[1]: fr24feed.service start request repea....
    May 19 18:01:07 raspberrypi systemd[1]: Failed to start Flightradar24 Decode....
    May 19 18:01:07 raspberrypi systemd[1]: Unit fr24feed.service entered failed....
    Hint: Some lines were ellipsized, use -l to show in full.[/FONT]

    So what to do?
    You use the visual output to find out why.

    https://forum.flightradar24.com/thre...ll=1#post74834

    Still not starting or MLAT or other functions are not working? Visually check WHY..
    - Stop FR24feed
    sudo systemctl stop fr24feed
    sudo service fr24feed stop

    - Start fr24feed with full output
    sudo fr24feed ( !! no 'Service' !! )

    Leave a comment:


  • fribse
    replied
    My image went bust due to a poweroutage, so I've tried rebuilding it according to the article.

    But when I do the update / upgrade, the fr24 doesn't work any longer on port 8754
    I've tried restarting the fr24feed, but it refuses to start:

    root@raspberrypi:/var/log# systemctl start fr24feed
    root@raspberrypi:/var/log# systemctl status fr24feed
    ● fr24feed.service - Flightradar24 Decoder & Feeder
    Loaded: loaded (/etc/systemd/system/fr24feed.service; enabled)
    Active: active (running) since Sun 2019-05-19 18:01:07 CEST; 87ms ago
    Process: 1219 ExecStartPre=/usr/lib/fr24/create_missing_directories.sh (code=exited, status=0/SUCCESS)
    Process: 1213 ExecStartPre=/usr/lib/fr24/unregister_kernel_modules.sh (code=exited, status=0/SUCCESS)
    Process: 1209 ExecStartPre=/usr/lib/fr24/install_dump1090.sh (code=exited, status=0/SUCCESS)
    Main PID: 1224 (fr24feed)
    CGroup: /system.slice/fr24feed.service
    ‣ 1224 [fr24feed]

    May 19 18:01:07 raspberrypi systemd[1]: Starting Flightradar24 Decoder & Fee....
    May 19 18:01:07 raspberrypi systemd[1]: Started Flightradar24 Decoder & Feeder.
    Hint: Some lines were ellipsized, use -l to show in full.
    root@raspberrypi:/var/log# systemctl status fr24feed
    ● fr24feed.service - Flightradar24 Decoder & Feeder
    Loaded: loaded (/etc/systemd/system/fr24feed.service; enabled)
    Active: failed (Result: start-limit) since Sun 2019-05-19 18:01:07 CEST; 3s ago
    Process: 1224 ExecStart=/usr/bin/fr24feed (code=exited, status=0/SUCCESS)
    Process: 1219 ExecStartPre=/usr/lib/fr24/create_missing_directories.sh (code=exited, status=0/SUCCESS)
    Process: 1213 ExecStartPre=/usr/lib/fr24/unregister_kernel_modules.sh (code=exited, status=0/SUCCESS)
    Process: 1209 ExecStartPre=/usr/lib/fr24/install_dump1090.sh (code=exited, status=0/SUCCESS)
    Main PID: 1224 (code=exited, status=0/SUCCESS)

    May 19 18:01:07 raspberrypi systemd[1]: fr24feed.service holdoff time over, ....
    May 19 18:01:07 raspberrypi systemd[1]: Stopping Flightradar24 Decoder & Fee....
    May 19 18:01:07 raspberrypi systemd[1]: Starting Flightradar24 Decoder & Fee....
    May 19 18:01:07 raspberrypi systemd[1]: fr24feed.service start request repea....
    May 19 18:01:07 raspberrypi systemd[1]: Failed to start Flightradar24 Decode....
    May 19 18:01:07 raspberrypi systemd[1]: Unit fr24feed.service entered failed....
    Hint: Some lines were ellipsized, use -l to show in full.


    So what to do?

    Leave a comment:


  • Oblivian
    replied
    Unless it's been fixed, I think the fr24 IMG at last check didn't know the core hardware changes in the 3b+ yet

    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • wiedehopf
    replied
    Well try an image of Raspbian Stretch Lite.

    Then you can use the install script for fr24feed.
    Last edited by wiedehopf; 2019-05-11, 20:38.

    Leave a comment:


  • catsartcox
    replied
    I am using the one it came with, and I would tend to agree from what I am googleing if it was not for the “read me” insert that came with the raspberry pi. It said that this is NOT a power issue, but instead a non compatible software. That the software is not for the 3B+

    Leave a comment:


  • wiedehopf
    replied
    Originally posted by catsartcox View Post
    Hi, I have been working on this raspberry pi thing all week. Trying so hard to work around the drop of support for windows. Anyways..currently my problem is trying to boot from this image (or the pi24 one). I get this "light bolt error", which going by the card insert in the raspberry pi kit, I am not using Pi 3 B+ compatible software. Is there something I am missing?
    thanks!
    "Lightning Bolt (Under-Voltage Warning) on Raspberry Pi. If a lightning bolt image appears in the top-right corner of the screen, it means Raspberry Pi is not getting enough voltage (4.65V according to this forum post)."

    You are using an insufficient power supply.

    To fix it try another one or buy one of the specially designed ones:
    https://www.raspberrypi.org/products...-power-supply/

    Leave a comment:


  • Oblivian
    replied
    I've just had to approve another 4 posts the forum prevented because they keep replying to you when you use @s.

    PLEASE STOP

    Leave a comment:


  • abcd567
    replied
    @catsartcox

    Use OPTION (B) of this thread:

    How to Feed Data to Multiple Sites - A Brief Guide

    Leave a comment:


  • catsartcox
    replied
    Hi, I have been working on this raspberry pi thing all week. Trying so hard to work around the drop of support for windows. Anyways..currently my problem is trying to boot from this image (or the pi24 one). I get this "light bolt error", which going by the card insert in the raspberry pi kit, I am not using Pi 3 B+ compatible software. Is there something I am missing?
    thanks!

    Leave a comment:


  • Damianiw
    replied
    Originally posted by theredguy View Post
    I'm currently doing that one but am having an issue with building the dump 1090 mutability package at the moment.

    I've followed the guide and got no error messages or issues till now, apparently there's something wrong with librtlsdr-dev and libusb-1.0-0-dev so it wont build.

    Going to see if downloading them again helps.

    Edit

    Seems that librtlsdr didin't install correctly, seems to be ok now.
    I experienced this on a pi zero w build last week, I copy and pasted all the lines to get the dependencies and librtlsdr-dev and libusb-1.0-0-dev needed a second try guess I’d have seen it if I did one at a time :-)


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • theredguy
    replied
    Thank you for the idea however everything is now done and I'm feeding to FR again along with the ability to view the dump feed like I wanted to.

    I'll have a bash at some other feeds tomorrow along with making a four leg spider antenna.

    Leave a comment:


  • wiedehopf
    replied
    If you don't want to compile dump1090-mutability you can just install dump1090-fa: (this doesn't include another feeder, it's just another dump1090 version)

    Code:
    wget http://flightaware.com/adsb/piaware/files/packages/pool/piaware/p/piaware-support/piaware-repository_3.6.3_all.deb
    sudo dpkg -i piaware-repository_3.6.3_all.deb
    sudo apt update
    sudo apt upgrade -y
    sudo apt remove -y dump1090-mutability dump1090
    sudo lighty-disable-mod dump1090
    sudo apt install -y dump1090-fa

    Leave a comment:


  • theredguy
    replied
    I'm currently doing that one but am having an issue with building the dump 1090 mutability package at the moment.

    I've followed the guide and got no error messages or issues till now, apparently there's something wrong with librtlsdr-dev and libusb-1.0-0-dev so it wont build.

    Going to see if downloading them again helps.

    Edit

    Seems that librtlsdr didin't install correctly, seems to be ok now.
    Last edited by theredguy; 2019-05-03, 17:52.

    Leave a comment:


  • abcd567
    replied
    @theredguy
    I personally prefer to use Raspbian image (OPTION- 3).

    Both Pi24 image and Piaware image are stripped down and customised to one specific use: "To feed data to their site".

    OPTION-3, i.e. using Raspbian Lite image from http://www.raspberrypi.org/downloads/raspbian , and installing the dump1090 of your choice (mutability or fa), and then installing only those data feeders which you want, is the most flexible and powerful install.

    After burning the Raspbian image, and while the microSD card is still in card reader of your Desktop/Laptop, click on the drive letter of microSD card (will show as "boot"), and in opened folder, create a new text file, and name it ssh. This is necessary to enable SSH.
    Last edited by abcd567; 2019-05-03, 17:50.

    Leave a comment:


  • theredguy
    replied
    I'm using a 3B+ so possibly that's the reason, thanks for mentioning it as it wouldn't have occurred to me.

    I've started following a guide so hopefully it will all go well considering I've got no Linux experience.

    Once I've got FR up and running I might see about feeding to more than one site.

    Leave a comment:

Working...
X