Announcement
Collapse
No announcement yet.
About my FR24 Radar Code.
Collapse
X
-
Originally posted by jacquesL View PostH
At first I set it incorrectly ( -0.27 in place of 0.27) but I corrected it using MyFeed page, dragging the arrow to the right place.
How can I see that ?
Use https://www.flightradar24.com/share-statistics and enter an airport code to see if there are receivers named after it. If not, the airport is probably too small and is not in the FR24 list of possible receiver designators.
/M
Leave a comment:
-
Hi
There are 4 (from the sharer statistics list): F-LFBI1, T-LFBI4, T-LFBI5, T-LFBI6.
Poul
Leave a comment:
-
Hi /M
Originally posted by MrMac View Post1. Did you set your position correctly ?
2. Are there other receivers using LFBI designation?
Tnx Jacques
Leave a comment:
-
1. Did you set your position correctly ?
2. Are there other receivers using LFBI designation? FR24 only uses the bigger airports, many smaller fields are not used for naming receivers.
/M
Leave a comment:
-
About my FR24 Radar Code.
Hi,
the context :
Flightradar24 Feeder/Decoder
Linux/generic/static_arm/1.0.18-9
Updated: 12:05:49 GMT+0200 (CEST)
FR24 Link: Connected via UDP
FR24 Radar Code: T-LFBN2
The question is about the FR24 Radar Code.
I am located about 1.5 km away from LFBI and I am suprised to see my feed is tagged LFBN wich is 60 kms away.
Not a big deal but I liker to understand (and learn
Thanks, JacquesTags: None
Leave a comment: