Announcement

Collapse
No announcement yet.

DVB-T stick

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DVB-T stick

    Hello.

    I have this kind of stick DVB-T DAB FM RTL2832U & R820T Tuner Mini USB RTL-SDR & ADS-B Receiver Stick BX. Sorry, i cant include link because im new here. Anyway, its from ebay.

    I installed fr24feed software. Log seems to be ok, it connects and pings. The problem is, it did not found any aircraft. My location is 10km away from airport, so there is quite a lot of traffic.

    Wrong stick?

  • #2
    Restart and start it in visual output mode and check the log per common errors and see.

    https://forum.flightradar24.com/showthread.php?p=74834

    Sent from my XT1092 using Tapatalk
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

    Comment


    • #3
      Im running Windows xp.

      Comment


      • #4
        Works the same. The important information is at the top of the log on launching. not once it starts pinging out

        Sent from my XT1092 using Tapatalk
        Posts not to be taken as official support representation - Just a helpful uploader who tinkers

        Comment


        • #5
          Do you mean fr24feed.exe, how to open it "visual output" way?

          Comment


          • #6
            Execute it. You can obviously see it is just pinging server and not receiving

            The reason why usually occurs when it starts. Close it. Open it, analyse the output as it loads config and connects to the hardware

            If it's got the wrong tuner like you asked, it will say it right at the top and differ to the working example in my first post on that thread

            Sent from my XT1092 using Tapatalk
            Posts not to be taken as official support representation - Just a helpful uploader who tinkers

            Comment


            • #7
              Originally posted by jarskis View Post
              Im running Windows xp.
              Have you installed the Zadig driver?

              I have a DVB-T dongle and get termination (SIGTERM) message when I run my windows software?

              It requires you to install the libusbK.dll driver using Zadig USB Driver Installation utility that you can download from http://zadig.akeo.ie.


              https://www.flightradar24.com/share-your-data
              Mike


              www.radarspotting.com

              Radarspotting since 2005

              Comment


              • #8
                Yes, Zadig is installed. Im just little bit worried, if its installed "right way". Should i change the driver for stick with Zadig, or just install it?

                I still cant add links and this forum image uploader gives me an error before i have 4 post. So iŽll try to send screenshot in next post.

                Comment


                • #9
                  Still problems with links

                  ibb dot co/jp7NVQ

                  Comment


                  • #10
                    Did you, before installing Zadig, load the drivers that came with the DVB-T?
                    Mike


                    www.radarspotting.com

                    Radarspotting since 2005

                    Comment


                    • #11
                      Seems the outputs now hidden less than the Raspberry pi builds.

                      You are meant to replace the drivers using zadig, there is a picture how to on the download page for it.
                      https://github.com/pbatard/libwdi/wiki/Zadig

                      The other trick, open task manager. Close all copies of MR-dump1090.exe and open it (mr-dump1090 only) again

                      For further details refer to <https://github.com/MalcolmRobb/dump1090>

                      Found 1 device(s):
                      0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
                      Found Rafael Micro R820T tuner
                      Max available gain is: 49.60
                      Setting gain to: 49.60
                      Exact sample rate is: 2000000.052982 Hz
                      Gain reported by device: 49.60
                      *8dc8228499006315f058940e46ff;
                      CRC: 000000 (ok)
                      DF 17: ADS-B message.
                      Capability : 5 (Level 2+3+4 (DF0,4,5,11,20,21,24,code7 - is airborne))
                      ICAO Address : c82284
                      Extended Squitter Type: 19
                      Extended Squitter Sub : 1
                      Extended Squitter Name: Airborne Velocity
                      EW status : Valid
                      Last edited by Oblivian; 2017-07-27, 08:25.
                      Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                      Comment


                      • #12
                        Originally posted by Anmer View Post
                        Did you, before installing Zadig, load the drivers that came with the DVB-T?
                        Yes, maybe i have to remove if it helps.

                        Comment


                        • #13
                          Things may have improved, but I was never able to find a way to remove previously installed drivers and replace with Zadig for Win XP.
                          Mike


                          www.radarspotting.com

                          Radarspotting since 2005

                          Comment


                          • #14
                            Originally posted by Anmer View Post
                            Things may have improved, but I was never able to find a way to remove previously installed drivers and replace with Zadig for Win XP.
                            So, there is no solution?

                            Comment


                            • #15
                              Originally posted by Anmer View Post
                              Things may have improved, but I was never able to find a way to remove previously installed drivers and replace with Zadig for Win XP.
                              Often have to be brutal and delete the latest oemxx.inf from windows\inf and a couple of DLLs if it holds on.

                              Sent from my XT1092 using Tapatalk
                              Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                              Comment

                              Working...
                              X