I have a problem while feeding data the FlightRadar24. I have this problem on screen and my status is "offline"
I have a NooElec NESDR Mini 2+ USB Dongle with an RTL2832U chipset
I'm running Windows at the moment but I've tried Linux and same results
My fr24feed version is 1.0.18-9
I run the feeder on a virtual machine on Proxmox but I tried several VMs and even on the server itself and unfortunately didn't work.
My VM was just installed for this setup (only zadig and the f24feed software)
Tried the same procedures on different VMs and on bare metal
Config page:
receiver="dvbt"
fr24key="(secret)"
path="mr-dump1090.exe"
bs="yes"
raw="yes"
logmode="1"
mlat="no"
mlat-without-gps="no"
Logs:
______ _ _ _ _ _ _____ ___
| ___|| |(_) | | | | | | / __ \ / |
| |_ | | _ __ _ | |__ | |_ _ __ __ _ __| | __ _ _ __`' / /' / /| |
| _| | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / / / /_| |
| | | || || (_| || | | || |_ | | | (_| || (_| || (_| || | ./ /___\___ |
\_| |_||_| \__, ||_| |_| \__||_| \__,_| \__,_| \__,_||_| \_____/ |_/
__/ |
|___/
[main][i]FR24 Feeder/Decoder
[main][i]Version: 1.0.18-9/generic
[main][i]Built on Apr 21 2017 14:51:08 (???/Windows/i386)
[main][i]Copyright 2012-2017 Flightradar24 AB
[main][i]FR24 website
[main][i]Reader thread started
[master][i]Starting processing thread
[httpd][i]Server started, listening on 0.0.0.0:8754
[reader][i]Initializing reader
[main][i]Socket server started
[bs][i]Initializing server
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[time][i]Synchronizing time via NTP
[bs][i]Starting server on 0.0.0.0:30003
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[time][i]Time synchronized correctly, offset +0.0022 seconds
[main][i]Feed Network client started
[feed][i]Downloading configuration
[main][i]RAW data server started
[raw][i]Initializing server
[raw][i]Starting server on 0.0.0.0:30002
[feed][c]Interval: 5s
[feed][c]Latitude: (secret)
[feed][c]Longitude: (secret)
[feed][c]GND: YES
[feed][c]NonADSB: YES
[feed][c]Timestamps: optional
[feed][c]Max range AIR: 350.0nm
[feed][c]Max range GND: 100.0nm
[feed][i]defined 5 servers
[stats][i]Stats thread started
[feed][n]ELLX69@83.140.21.85:8099/UDP
[feed][n]connecting
[feed][n]connected via UDP (fd 984)
[feed][n]working
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[feed][n]ping 1
[feed][n]syncing stream result: 1
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
I really hope you could help me please...
I have a NooElec NESDR Mini 2+ USB Dongle with an RTL2832U chipset
I'm running Windows at the moment but I've tried Linux and same results
My fr24feed version is 1.0.18-9
I run the feeder on a virtual machine on Proxmox but I tried several VMs and even on the server itself and unfortunately didn't work.
My VM was just installed for this setup (only zadig and the f24feed software)
Tried the same procedures on different VMs and on bare metal
Config page:
receiver="dvbt"
fr24key="(secret)"
path="mr-dump1090.exe"
bs="yes"
raw="yes"
logmode="1"
mlat="no"
mlat-without-gps="no"
Logs:
______ _ _ _ _ _ _____ ___
| ___|| |(_) | | | | | | / __ \ / |
| |_ | | _ __ _ | |__ | |_ _ __ __ _ __| | __ _ _ __`' / /' / /| |
| _| | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / / / /_| |
| | | || || (_| || | | || |_ | | | (_| || (_| || (_| || | ./ /___\___ |
\_| |_||_| \__, ||_| |_| \__||_| \__,_| \__,_| \__,_||_| \_____/ |_/
__/ |
|___/
[main][i]FR24 Feeder/Decoder
[main][i]Version: 1.0.18-9/generic
[main][i]Built on Apr 21 2017 14:51:08 (???/Windows/i386)
[main][i]Copyright 2012-2017 Flightradar24 AB
[main][i]FR24 website
[main][i]Reader thread started
[master][i]Starting processing thread
[httpd][i]Server started, listening on 0.0.0.0:8754
[reader][i]Initializing reader
[main][i]Socket server started
[bs][i]Initializing server
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[time][i]Synchronizing time via NTP
[bs][i]Starting server on 0.0.0.0:30003
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[time][i]Time synchronized correctly, offset +0.0022 seconds
[main][i]Feed Network client started
[feed][i]Downloading configuration
[main][i]RAW data server started
[raw][i]Initializing server
[raw][i]Starting server on 0.0.0.0:30002
[feed][c]Interval: 5s
[feed][c]Latitude: (secret)
[feed][c]Longitude: (secret)
[feed][c]GND: YES
[feed][c]NonADSB: YES
[feed][c]Timestamps: optional
[feed][c]Max range AIR: 350.0nm
[feed][c]Max range GND: 100.0nm
[feed][i]defined 5 servers
[stats][i]Stats thread started
[feed][n]ELLX69@83.140.21.85:8099/UDP
[feed][n]connecting
[feed][n]connected via UDP (fd 984)
[feed][n]working
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[feed][n]ping 1
[feed][n]syncing stream result: 1
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
[reader][i]Connecting to DVBT receiver via (exe://mr-dump1090.exe --raw)
[reader][i]Connected to the receiver, configuring
[reader][i]Configured, processing messages
[reader][i]Connection terminated
I really hope you could help me please...
Comment