New user and having problems! (Raspberry Pi hardware platform)

[davewill2010]

Hi Guys,

Status is

Flightradar24 Feeder/Decoder
Linux/generic/static_arm/1.0.18-9
Updated: 14:36:11 GMT+0100 (GMT Standard Time)

FR24 Link: Connected via UDP
FR24 Radar Code: T-EGNR69
Aircraft Tracked (ModeS & ADS-B): 0
Aircraft Uploaded: N/A
Receiver: avr-tcp, Connected
MLAT running: NO

any ideas how to troubleshoot please? have tried restarting.

[davewill2010]

Reran ths config instructions and now looking much better i think:

Flightradar24 Feeder/Decoder
Linux/generic/static_arm/1.0.18-9
Updated: 15:15:01 GMT+0100 (GMT Standard Time)

FR24 Link: Connected via UDP
FR24 Radar Code: T-EGNR69
Aircraft Tracked (ModeS & ADS-B): 4
Aircraft Uploaded: 4
Receiver: dvbt, Connected
MLAT running: YES

[davewill2010]

Ok soooo now how do I see the aircraft that I am tracking? is there no map like on FlightAware?

[davewill2010]

read the guide ..

WOW SO helpful!

[abcd567]

Ok soooo now how do I see the aircraft that I am tracking? is there no map like on FlightAware?

In your Desktop/Laptop/Tablet/Phone on same Local Area Network, open a browser and in address bar type:

http://<IP of Pi>:8754/settings.html

On the settings page, in the field "ProcessArguments" type this

--net --net-http-port 8080

Click the "Save" and then "Restart" buttons, both at bottom-right of settings page.

Now you can see map with planes in your browser at following address:

http://<IP of Pi>:8080

In settings, you can use any port number instead of 8080 if you like, for example 8765 etc, but should use the same port number when viewing the map.
.

[davewill2010]

In your Desktop/Laptop/Tablet/Phone on same Local Area Network, open a browser and in address bar type:

**removed because i cannot post lin ks!**

On the settings page, in the field "ProcessArguments" type this

--net --net-http-port 8080

Click the "Save" and then "Restart" buttons, both at bottom-right of settings page.

Now you can see map with planes in your browser at following address:

**removed because i cannot post lin ks!**

In settings, you can use any port number instead of 8080 if you like, for example 8765 etc, but should use the same port number when viewing the map.
.

Exactly what I was looking for! Thank you!

1 more question, where can I see my stats?

[Oblivian]

WOW SO helpful!

ISP:

PT Telkom Indonesia

You can thank another low paid worker selling their soul to give false promises of 'high google rank' for that post.

If you have not already, poke around my and abcd567s posts.

https://forum.flightradar24.com/threads/9866-Fr24feed-software-Additional-FAQs-and-Info

We have tried to lay most this info out for people.

As always suggestions if you find something is missing or not clear/correct can be provided (I even asked people and gave a forum thread link but no one ever does)