Announcement

Collapse
No announcement yet.

First Time Raspberry PI Issues...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • First Time Raspberry PI Issues...

    So I go the Raspberry Pi up and running...installed the software ect...
    When i go into "Sudo fr24feed status" is see the following error message...But I can't find it anywhere else on the post. Can anyone help?
    1) I know the USB device is ok, because I briefly got it working on my PC.


    Attached is the image...

    IMG_7093.jpg

  • #2
    Status is broken in new version. Use the web page instead. Do full restart to allow it to start only one copy. Check page status.

    Sent from my XT1092 using Tapatalk
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

    Comment


    • #3
      See common errors and in use section https://forum.flightradar24.com/showthread.php?p=74834

      Sent from my XT1092 using Tapatalk
      Posts not to be taken as official support representation - Just a helpful uploader who tinkers

      Comment


      • #4
        OK..now I have this on the Screen.....I am out of ideas here...Can anyone help?
        I am 12 Miles from the airport.

        IMG_7095.jpg

        As I write this we are back to the first phtot I posted.

        Comment


        • #5
          Sorry for being a Noob..but how do I use the "Webpage"? I know IP Address is http://192.168.1.19.....do I just put 30002 after that?


          Ok...Checked the status and everything looks good...

          IMG_7096.jpg
          Last edited by chap6595; 2017-06-08, 13:11. Reason: Uploaded Photo

          Comment


          • #6
            OK...finally got into the Wepage.

            Flightradar24 Feeder/Decoder

            Linux/generic/static_arm/1.0.18-9

            Updated: 23:28:32 GMT+1000 (AEST)

            FR24 Link: Connected via UDP
            FR24 Radar Code: T-YMEN49
            Aircraft Tracked (ModeS & ADS-B): 0
            Aircraft Uploaded: N/A
            Receiver: dvbt, Connected
            MLAT running: N/A
            Actions:

            Settings
            Restart software
            Terminate software
            Show tracked aircraft list
            Show status variables (*)
            * - Debug only, will be removed later


            Is that what I should be seeing?

            Comment


            • #7
              Reboot again, do NOT run the status command. Every time you do it reattaches and runs a2nd copy, a 3rd, 4th.. each time causing the conflict to go straight back to square 1

              If you look at other suggestions on my linked post. It also says start feeder WITHOUT 'service' and watch what happens to ensure all is ok.

              The ping issue is no data

              I also see no gain available. This is indicative of wrong type of dvbt stick.

              The info for that appears before the page you photo

              Sent from my XT1092 using Tapatalk
              Posts not to be taken as official support representation - Just a helpful uploader who tinkers

              Comment


              • #8
                I had the notification before deleting abcd did you try locally? Have a feeling latest update the service status function is broken and relaunches instead

                Sent from my XT1092 using Tapatalk
                Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                Comment


                • #9
                  Originally posted by Oblivian View Post
                  I had the notification before deleting abcd did you try locally? Have a feeling latest update the service status function is broken and relaunches instead

                  Sent from my XT1092 using Tapatalk
                  No I did not try as I am away from home, and have posted from phone. I deleted the post shortly afterwards as I did not feel comfortable to post something without first trying myself and making sure.

                  However the systemctl command works with most of feeders in Raspbian Jessie.

                  When at home, I will try following commands with fr24feeder. These sure work with flightaware, planefinder, and radarbox24 feeders

                  sudo killall fr24feeder
                  sudo systemctl restart fr24feed

                  sudo service fr24feed status
                  sudo systemctl status fr24feed
                  Last edited by abcd567; 2017-06-09, 07:08.

                  Comment


                  • #10
                    Originally posted by Oblivian View Post
                    did you try locally? Have a feeling latest update the service status function is broken and relaunches instead
                    At home, tested, it works.
                    My install is
                    Raspbian Jessie image written to microSD Card
                    dump1090-fa package install (dump1090-fa_3.5.0_armhf.deb)
                    fr24 feeder package install (fr24feed_1.0.18-9_armhf.deb)

                    What is the install of chap6595?
                    Is he using Pi24 image, or Raspbian Jessie image?
                    Is he using built-in dump1090 of fr24feed, OR did he install any version of dump1090 (MR, mutability, flightaware)?





                    Comment


                    • #11
                      Originally posted by chap6595 View Post
                      OK...finally got into the Wepage.

                      Flightradar24 Feeder/Decoder

                      Linux/generic/static_arm/1.0.18-9

                      Updated: 23:28:32 GMT+1000 (AEST)

                      FR24 Link: Connected via UDP
                      FR24 Radar Code: T-YMEN49
                      Aircraft Tracked (ModeS & ADS-B): 0
                      Aircraft Uploaded: N/A
                      Receiver: dvbt, Connected
                      MLAT running: N/A
                      Actions:

                      Settings
                      Restart software
                      Terminate software
                      Show tracked aircraft list
                      Show status variables (*)
                      * - Debug only, will be removed later


                      Is that what I should be seeing?
                      (A) If you have not installed any version of dump1090, your settings are ok. Just wait for few minutes then reload/refresh the webpage. The following two items should start showing some numbers instead of 0 and N/A:
                      Aircraft Tracked (ModeS & ADS-B): 0
                      Aircraft Uploaded: N/A


                      (B) If you have installed some version of dump1090 (Malcom Robson, mutability, or Flightaware), your setting "Receiver: dvbt" should be changed to "Receiver AVR(TCP)" and "Host/IP 127.0.0.1:30002".

                      Go to page http://192.168.1.19:8754/settings.html (replace 192.168.1.19 by IP of your Pi). Now make settings as shown in screenshot below.

                      After making changes, click "Save" button at bottom-right corner of settings page. After saving, click "Restart" button, adjacent to "Save" button, and wait for webpage to appear. It should now show some numbers against "Aircraft Tracked" and "Aircraft Uploaded".

                      Comment


                      • #12
                        So I am using the Raspbian Jessie image. The software says its connected and the USB Stick I know works, as it have got it to be online for a brief window.
                        I have just done as suggested above and reinstalled it.

                        Comment


                        • #13
                          Originally posted by abcd567 View Post
                          (A) If you have not installed any version of dump1090, your settings are ok. Just wait for few minutes then reload/refresh the webpage. The following two items should start showing some numbers instead of 0 and N/A:
                          Aircraft Tracked (ModeS & ADS-B): 0
                          Aircraft Uploaded: N/A


                          (B) If you have installed some version of dump1090 (Malcom Robson, mutability, or Flightaware), your setting "Receiver: dvbt" should be changed to "Receiver AVR(TCP)" and "Host/IP 127.0.0.1:30002".

                          Go to page http://192.168.1.19:8754/settings.html (replace 192.168.1.19 by IP of your Pi). Now make settings as shown in screenshot below.

                          After making changes, click "Save" button at bottom-right corner of settings page. After saving, click "Restart" button, adjacent to "Save" button, and wait for webpage to appear. It should now show some numbers against "Aircraft Tracked" and "Aircraft Uploaded".


                          OK...here is my page now. The aerial is outside, clear view of the sky. I know the USB Stick is the correct sort....no idea!!!!!

                          FR24 Settings.jpg

                          Comment


                          • #14
                            Did you do what I and ABCD567 suggested and run

                            sudo fr24feed start

                            https://forum.flightradar24.com/thre...ll=1#post92289

                            After first stopping (sudo service fr24feed stop) to prevent the conflict errors.

                            note - no service

                            And keeping an eye on the output?
                            Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                            Comment


                            • #15
                              OK...
                              pi@raspberrypi:~ $ sudo fr24feed
                              ______ _ _ _ _ _ _____ ___
                              | ___|| |(_) | | | | | | / __ \ / |
                              | |_ | | _ __ _ | |__ | |_ _ __ __ _ __| | __ _ _ __`' / /' / /| |
                              | _| | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / / / /_| |
                              | | | || || (_| || | | || |_ | | | (_| || (_| || (_| || | ./ /___\___ |
                              \_| |_||_| \__, ||_| |_| \__||_| \__,_| \__,_| \__,_||_| \_____/ |_/
                              __/ |
                              |___/
                              2017-06-14 07:32:21 | [main][i]FR24 Feeder/Decoder
                              2017-06-14 07:32:21 | [main][i]Version: 1.0.18-9/generic
                              2017-06-14 07:32:21 | [main][i]Built on Apr 20 2017 09:25:30 (T201704200925/Linux/static_arm)
                              2017-06-14 07:32:21 | [main][i]Copyright 2012-2017 Flightradar24 AB
                              2017-06-14 07:32:21 | [main][i]http://flightradar24.com
                              2017-06-14 07:32:21 | [main][i]DNS mode: PING
                              2017-06-14 07:32:22 | [main][i]Automatic updates are DISABLED
                              2017-06-14 07:32:22 | ERROR
                              2017-06-14 07:32:22 | [httpd][e]bind function failed, errno: 98
                              2017-06-14 07:32:22 | [httpd][d]Master thread terminated
                              2017-06-14 07:32:22 | [main][i]Reader thread started
                              2017-06-14 07:32:22 | [master][i]Starting processing thread
                              2017-06-14 07:32:22 | [reader][i]Initializing reader
                              2017-06-14 07:32:22 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw)
                              2017-06-14 07:32:22 | [time][i]Synchronizing time via NTP
                              2017-06-14 07:32:22 | [reader][i]Connected to the receiver, configuring
                              2017-06-14 07:32:22 | [reader][i]Configured, processing messages
                              Found 1 device(s):
                              0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
                              usb_claim_interface error -6
                              Error opening the RTLSDR device: Device or resource busy
                              2017-06-14 07:32:22 | [reader][i]Connection terminated
                              2017-06-14 07:32:22 | [main][i]Terminating child process 1414 with SIGTERM
                              2017-06-14 07:32:27 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw)
                              2017-06-14 07:32:27 | [reader][i]Connected to the receiver, configuring
                              2017-06-14 07:32:27 | [reader][i]Configured, processing messages
                              Found 1 device(s):
                              0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
                              usb_claim_interface error -6
                              Error opening the RTLSDR device: Device or resource busy
                              2017-06-14 07:32:27 | [reader][i]Connection terminated
                              2017-06-14 07:32:27 | [main][i]Terminating child process 1430 with SIGTERM
                              2017-06-14 07:32:33 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw)
                              2017-06-14 07:32:33 | [reader][i]Connected to the receiver, configuring
                              2017-06-14 07:32:33 | [reader][i]Configured, processing messages
                              Found 1 device(s):
                              0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
                              usb_claim_interface error -6
                              Error opening the RTLSDR device: Device or resource busy
                              2017-06-14 07:32:33 | [reader][i]Connection terminated
                              2017-06-14 07:32:33 | [main][i]Terminating child process 1434 with SIGTERM
                              2017-06-14 07:32:38 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw)
                              2017-06-14 07:32:38 | [reader][i]Connected to the receiver, configuring
                              2017-06-14 07:32:38 | [reader][i]Configured, processing messages
                              Found 1 device(s):
                              0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
                              usb_claim_interface error -6
                              Error opening the RTLSDR device: Device or resource busy
                              2017-06-14 07:32:38 | [reader][i]Connection terminated
                              2017-06-14 07:32:38 | [main][i]Terminating child process 1462 with SIGTERM
                              2017-06-14 07:32:38 | [time][i]Time synchronized correctly, offset -0.0004 seconds
                              2017-06-14 07:32:38 | [main][i]Feed Network client started
                              2017-06-14 07:32:38 | [feed][i]Downloading configuration
                              2017-06-14 07:32:40 | [feed][c]Interval: 5s
                              2017-06-14 07:32:40 | [feed][c]Latitude: -37.7776
                              2017-06-14 07:32:40 | [feed][c]Longitude: 145.0190
                              2017-06-14 07:32:40 | [feed][c]GND: YES
                              2017-06-14 07:32:40 | [feed][c]NonADSB: YES
                              2017-06-14 07:32:40 | [feed][c]Timestamps: optional
                              2017-06-14 07:32:40 | [feed][c]Max range AIR: 350.0nm
                              2017-06-14 07:32:40 | [feed][c]Max range GND: 100.0nm
                              2017-06-14 07:32:40 | [feed][i]defined 5 servers
                              2017-06-14 07:32:40 | [stats][i]Stats thread started
                              2017-06-14 07:32:40 | [feed][n]YMEN49@83.140.21.87:8099/UDP
                              2017-06-14 07:32:40 | [feed][n]connecting
                              2017-06-14 07:32:40 | [feed][n]connected via UDP (fd 7)
                              2017-06-14 07:32:40 | [feed][n]working
                              2017-06-14 07:32:44 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw)
                              2017-06-14 07:32:44 | [reader][i]Connected to the receiver, configuring
                              2017-06-14 07:32:44 | [reader][i]Configured, processing messages
                              Found 1 device(s):
                              0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
                              usb_claim_interface error -6
                              Error opening the RTLSDR device: Device or resource busy
                              2017-06-14 07:32:44 | [reader][i]Connection terminated
                              2017-06-14 07:32:44 | [main][i]Terminating child process 1471 with SIGTERM
                              2017-06-14 07:32:49 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw)
                              2017-06-14 07:32:49 | [reader][i]Connected to the receiver, configuring
                              2017-06-14 07:32:49 | [reader][i]Configured, processing messages
                              Found 1 device(s):
                              0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
                              usb_claim_interface error -6
                              Error opening the RTLSDR device: Device or resource busy
                              2017-06-14 07:32:49 | [reader][i]Connection terminated
                              2017-06-14 07:32:49 | [main][i]Terminating child process 1475 with SIGTERM
                              2017-06-14 07:32:55 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw)
                              2017-06-14 07:32:55 | [reader][i]Connected to the receiver, configuring
                              2017-06-14 07:32:55 | [reader][i]Configured, processing messages
                              Found 1 device(s):
                              0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
                              usb_claim_interface error -6
                              Error opening the RTLSDR device: Device or resource busy
                              2017-06-14 07:32:55 | [reader][i]Connection terminated
                              2017-06-14 07:32:55 | [main][i]Terminating child process 1479 with SIGTERM
                              2017-06-14 07:33:00 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw)
                              2017-06-14 07:33:00 | [reader][i]Connected to the receiver, configuring
                              2017-06-14 07:33:00 | [reader][i]Configured, processing messages
                              Found 1 device(s):
                              0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
                              usb_claim_interface error -6
                              Error opening the RTLSDR device: Device or resource busy
                              2017-06-14 07:33:00 | [reader][i]Connection terminated
                              2017-06-14 07:33:00 | [main][i]Terminating child process 1484 with SIGTERM
                              2017-06-14 07:33:06 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw)
                              2017-06-14 07:33:06 | [reader][i]Connected to the receiver, configuring
                              2017-06-14 07:33:06 | [reader][i]Configured, processing messages
                              Found 1 device(s):
                              0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
                              usb_claim_interface error -6
                              Error opening the RTLSDR device: Device or resource busy
                              2017-06-14 07:33:06 | [reader][i]Connection terminated
                              2017-06-14 07:33:06 | [main][i]Terminating child process 1488 with SIGTERM
                              2017-06-14 07:33:10 | [feed][n]ping 1
                              2017-06-14 07:33:11 | [feed][n]syncing stream result: 1
                              2017-06-14 07:33:12 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw)
                              2017-06-14 07:33:12 | [reader][i]Connected to the receiver, configuring
                              2017-06-14 07:33:12 | [reader][i]Configured, processing messages
                              Found 1 device(s):
                              0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
                              usb_claim_interface error -6
                              Error opening the RTLSDR device: Device or resource busy
                              2017-06-14 07:33:12 | [reader][i]Connection terminated
                              2017-06-14 07:33:12 | [main][i]Terminating child process 1492 with SIGTERM
                              2017-06-14 07:33:17 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw)
                              2017-06-14 07:33:17 | [reader][i]Connected to the receiver, configuring
                              2017-06-14 07:33:17 | [reader][i]Configured, processing messages
                              Found 1 device(s):
                              0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
                              usb_claim_interface error -6
                              Error opening the RTLSDR device: Device or resource busy
                              2017-06-14 07:33:34 | [reader][i]Connection terminated
                              2017-06-14 07:33:34 | [main][i]Terminating child process 1508 with SIGTERM
                              2017-06-14 07:33:39 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw)
                              2017-06-14 07:33:39 | [reader][i]Connected to the receiver, configuring
                              2017-06-14 07:33:39 | [reader][i]Configured, processing messages
                              Found 1 device(s):
                              0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
                              usb_claim_interface error -6
                              Error opening the RTLSDR device: Device or resource busy
                              2017-06-14 07:33:39 | [reader][i]Connection terminated
                              2017-06-14 07:33:39 | [main][i]Terminating child process 1512 with SIGTERM
                              2017-06-14 07:33:40 | [feed][n]ping 2
                              2017-06-14 07:33:41 | [feed][n]syncing stream result: 1
                              2017-06-14 07:33:45 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw)
                              2017-06-14 07:33:45 | [reader][i]Connected to the receiver, configuring
                              2017-06-14 07:33:45 | [reader][i]Configured, processing messages
                              Found 1 device(s):
                              0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
                              usb_claim_interface error -6

                              Comment

                              Working...
                              X