Announcement

Collapse
No announcement yet.

Help with new instalation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with new instalation

    Hi!

    I'm a new user, i installed the server few hours ago bat i don't now if its working?

    When i access to website i get this info:

    Flightradar24 Feeder/Decoder

    Linux/generic/armv7l/1.0.18-7

    Updated: 19:13:27 GMT+0200 (CEST)

    FR24 Link: Connected via UDP
    FR24 Radar Code: xxxxxzz
    Aircraft Tracked (ModeS & ADS-B): 0
    Aircraft Uploaded: N/A
    Receiver: dvbt, Connected
    MLAT running: N/A


    How can i know if it's working

  • #2
    Until you get 3+ contacts, it won't activate the account and start uploading.

    This can be caused by no aircraft, bad antenna, wrong setup options.

    What is your receiver, given you say connected via UDP this means you selected something other than DVBT stick if you have one and need to ensure something is doing the decoding for you. Or it may be trying to constantly connect

    This appears to be on a Raspberry Pi.

    Use the commands to stop the feeder and run it normal mode (not service) to see the log

    sudo fr24feed service stop
    sudo fr24feed start

    Other tips here

    https://forum.flightradar24.com/thre...ll=1#post74834
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

    Comment


    • #3
      Hi this is the lsusb output

      Bus 001 Device 004: ID 187f:0600 Siano Mobile Silicon
      Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
      Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
      Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

      The dvbt device is the first one

      Comment


      • #4
        Given that company makes their own tuner chipsets.

        I very much doubt it has the Realtek(RTL) chip required to tune to ADSB unfortunately

        I cannot find anything on SDR sites confirming that as a compatible stick.
        Posts not to be taken as official support representation - Just a helpful uploader who tinkers

        Comment


        • #5
          Hi!

          I cant post link but you can sesrch for this CTVDIGUSB2 in conceptronic website, i find the dataset and aparently the chipset is Chipset
          Realtek RTL2832

          Comment


          • #6
            In which case I would suspect it should not be detected as Siano Mobile Silicon, or isn't being detected by your system at all

            The normal output should be similar to Bus 002 Device 009: ID 0bda:2838 Realtek Semiconductor Corp
            Posts not to be taken as official support representation - Just a helpful uploader who tinkers

            Comment


            • #7
              Someone else on reddit had the same issue.

              Opened it up, and tada..

              http://i.imgur.com/XCR3Z.jpg
              Posts not to be taken as official support representation - Just a helpful uploader who tinkers

              Comment


              • #8
                Of course the best way to confirm it is with the first lot of commands

                sudo fr24feed service stop
                sudo fr24feed start

                Will spawn Dump1090 on-screen rather than system and output the device found and if usable.
                Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                Comment


                • #9
                  I bought a this new Dvbt stik in ebay 201568564126 (item number)

                  SINTONIZADOR TDT HD USB TV FM + DAB DVB-T RTL2832U + R820T

                  I will recive it next week i hope fr24 dont cancel my account

                  Comment

                  Working...
                  X