Announcement

Collapse
No announcement yet.

Automated Installation of Dump1090-Mutability, Data Feeders, and Performance Graphs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • abcd567
    replied
    MikeyMoMo:

    The script in first post has issues, as it is not regularly maintained by the author J Prochazka.

    If you have RPi, use the item "2 - Download and Install PiAware" on this page:

    https://flightaware.com/adsb/piaware/install
    Last edited by abcd567; 2019-12-30, 17:49.

    Leave a comment:


  • MikeyMoMo
    replied
    The Piaware install failed with the messages:

    Installing the FlightAware PiAware client package...

    dpkg: error: cannot access archive '/home/pi/adsb-receiver/build/piaware_builder/piaware_*.deb': No such file or directory

    Checking that the FlightAware PiAware client package was installed properly...

    INSTALLATION HALTED!
    UNABLE TO INSTALL A REQUIRED PACKAGE.
    SETUP HAS BEEN TERMINATED!

    The package "piaware" could not be installed.

    ------------------------------------------------------------------------------
    FlightAware PiAware client setup halted.

    Press enter to continue...

    Leave a comment:


  • MikeyMoMo
    replied
    I had the same problem as in #170. I backed off and installed Dump1090-mutability by using apt and then reran the install.sh. I did NOT select the second offer to install mutability. It asked even though it had already told me that it was installed. Then it ran to completion without that missing .deb file message and started installing the feeders.

    Leave a comment:


  • IZ8292SWL
    replied
    Originally posted by wiedehopf View Post
    This is really the wrong thread for this question, this is: https://forum.flightradar24.com/thre...1090-et-cetera

    The system stats assume a Raspberry Pi system for the most part.
    Please show the logs for graphs1090 as described here https://github.com/wiedehopf/adsb-wi...Debug-commands
    And put the answer in the other appropriate thread.
    Ok, take a look at my new post there and thanks in advance

    Leave a comment:


  • wiedehopf
    replied
    This is really the wrong thread for this question, this is: https://forum.flightradar24.com/thre...1090-et-cetera

    The system stats assume a Raspberry Pi system for the most part.
    Please show the logs for graphs1090 as described here https://github.com/wiedehopf/adsb-wi...Debug-commands
    And put the answer in the other appropriate thread.

    Leave a comment:


  • IZ8292SWL
    replied
    Originally posted by abcd567 View Post
    IZ8292SWL:
    Using the script in the first post of this thread to install graphs one has to installs web portal. The web portal includs PHP, MySQL and Graphs. This is unnecessary and is buggy.

    Recently wiedehopf has written a script which installs "graph-only", no PHP, no MySQL, and no web portal. It can be installed very easily by copy-pasting the following script in your SSH console. I strongly recomment this for installing graphs.

    Code:
    sudo bash -c "$(wget -q -O - https://raw.githubusercontent.com/wiedehopf/graphs1090/master/install.sh)"
    For details see this page: https://github.com/wiedehopf/graphs1...ster/README.md
    Hi!
    I'm using Graphs1090 and it's a great tool! But don't get any system stats, only ADSB data (the most importnat thing anyway...).
    Is there something i can do?
    I already tried to update the application using the method described in the Github page.

    Leave a comment:


  • abcd567
    replied
    IZ8292SWL:
    Using the script in the first post of this thread to install graphs one has to installs web portal. The web portal includs PHP, MySQL and Graphs. This is unnecessary and is buggy.

    Recently wiedehopf has written a script which installs "graph-only", no PHP, no MySQL, and no web portal. It can be installed very easily by copy-pasting the following script in your SSH console. I strongly recomment this for installing graphs.

    Code:
    sudo bash -c "$(wget -q -O - https://raw.githubusercontent.com/wiedehopf/graphs1090/master/install.sh)"
    For details see this page: https://github.com/wiedehopf/graphs1...ster/README.md

    Leave a comment:


  • abcd567
    replied
    Originally posted by wiedehopf View Post
    Think you forgot probably one of the most important aspects: Antenna location / location.
    Yes location/antenna location is very important, but he asked about hardware
    But i mean, the hardware behind.
    Antenna? Filter? Etc

    Leave a comment:


  • wiedehopf
    replied
    Think you forgot probably one of the most important aspects: Antenna location / location.

    Leave a comment:


  • abcd567
    replied
    IZ8292SWL:

    The results plotted in the form of graphs are combined performance of:

    Antenna + Coax cable + Filter + LNA + DVB-T + Gain Setting
    Last edited by abcd567; 2019-10-19, 11:07.

    Leave a comment:


  • IZ8292SWL
    replied
    Originally posted by abcd567 View Post
    IZ8292SWL:

    RRDTOOL + COLLECTD
    Thanks!
    But i mean, the hardware behind.
    Antenna? Filter? Etc

    Leave a comment:


  • abcd567
    replied
    IZ8292SWL:

    RRDTOOL + COLLECTD

    Leave a comment:


  • IZ8292SWL
    replied
    Originally posted by abcd567 View Post
    DUMP1090-MUTABILITY MAP





    SOME OF THE PERFORMANCE GRAPHS














    What's the setup behind this graph?
    Looks amazing!!

    Leave a comment:


  • eurolocke
    replied
    Hi guys!

    I can't get the dump1090-mutability package running, receiving the following error:


    Installing packages needed to fulfill dependencies for dump1090-mutability...

    Checking if the package git is installed... [OK]
    Checking if the package curl is installed... [OK]
    Checking if the package build-essential is installed... [OK]
    Checking if the package debhelper is installed... [OK]
    Checking if the package cron is installed... [OK]
    Checking if the package librtlsdr-dev is installed... [OK]
    Checking if the package libusb-1.0-0-dev is installed... [OK]
    Checking if the package rtl-sdr is installed... [OK]
    Checking if the package pkg-config is installed... [OK]
    Checking if the package lighttpd is installed... [OK]
    Checking if the package fakeroot is installed... [OK]

    Begining the dump1090-mutability installation process...

    Installing blacklist to prevent unwanted kernel modules from being loaded... Entering the dump1090-mutability git repository directory...
    Updating the local dump1090-mutability git repository...

    Already up-to-date.

    Building and installing the dump1090-mutability package...

    Building the dump1090-mutability package...

    tail: cannot open 'debian/changelog' for reading: No such file or directory
    dpkg-buildpackage: error: tail of debian/changelog gave error exit status 1

    Installing the dump1090-mutability package...

    dpkg: error: cannot access archive '/home/pi/adsb-receiver/build/dump1090-mutability/dump1090-mutability_1.15~dev_*.deb': No such file or directory

    Checking that the dump1090-mutability package was installed properly...

    INSTALLATION HALTED!
    UNABLE TO INSTALL A REQUIRED PACKAGE.
    SETUP HAS BEEN TERMINATED!

    The package "-mutability" could not be installed.

    ------------------------------------------------------------------------------
    Dump1090-mutability setup halted.

    Press enter to continue...

    Do you guys can help me out? I tried multiple reboots, installations w/o updating the operating system beforehand, and doing all updates... it all didn't work!

    Appreciate your help!

    Laurenz

    Leave a comment:


  • AlejandroM
    replied
    Originally posted by wiedehopf View Post
    You'll have to run the install again and it's sufficient to select installing the web interface and the graphs.

    But i'd just go with the standalone graphs (but i'm biased as i work on them)
    https://github.com/wiedehopf/graphs1090#graphs1090
    nice, i have just installed the graphs on my 3 devices,

    Leave a comment:

Working...
X