Rpi+nooelec Can you tell me if this is OK?

[alejandrofm]

Hi, yesterday I installed and configured the receiver, and I want to know if everything is ok, my status doesn't show as "clean" as other I see here.
This is my status:

pi@raspberrypi:~ $ service fr24feed status
● fr24feed.service - LSB: Flightradar24 Decoder & Feeder
Loaded: loaded (/etc/init.d/fr24feed)
Active: active (running) since Sat 2016-08-27 10:17:05 ART; 59min ago
Process: 532 ExecStart=/etc/init.d/fr24feed start (code=exited, status=0/SUCCESS)
CGroup: /system.slice/fr24feed.service
├─ 692 /usr/bin/fr24feed -- --monitor-file=/dev/shm/fr24feed.txt -...
└─1130 /usr/lib/fr24/dump1090 --raw --mlat


I am seeing this in the web interface:
Flightradar24 Feeder/Decoder

Linux/generic/armv7l/1.0.18-7

Updated: 11:18:09 GMT-0300 (Argentina Standard Time)

FR24 Link: Connected via UDP
FR24 Radar Code: T-SABE26
Aircraft Tracked (ModeS & ADS-B): 2
Aircraft Uploaded: 1
Receiver: dvbt, Connected
MLAT running: YES
Actions:

And this in tracking (right now):
ModeS: E021C9 Callsign: N/A
Lat: N/A
Long: N/A
Alt: 2475ft
SQW: 0000

ModeS: E06414 Callsign: N/A
Lat: N/A
Long: N/A
Alt: 6575ft
SQW: 0000

And one more question, what "Aircraft Uploaded: 1" means? I have upload 1 since start? i'm uploading 1 right now?
Thank you!

[Oblivian]

Jessie does not output service data without a mod

http://forum.flightradar24.com/threads/10070-MLAT-Driving-me-mad?p=77657&viewfull=1#post77657

If you can see uploaded, its uploading data

[alejandrofm]

Jessie does not output service data without a mod
If you can see uploaded, its uploading data

Thank you, I can see the data uploading without problems now, now reading to get more coverage!