No announcement yet.

Noob, need help lol

  • Filter
  • Time
  • Show
Clear All
new posts

  • Noob, need help lol

    is this stuck in a boot loop?

    Windows 7 Home Premium 64 Bit
    AMD A6-3670APU 2.7ghz
    8gb ram
    All the updates installed

    I've installed the DVB-T drivers, because Win 7 said it was installed when I just plugged it in the USB socket, and I read from somewhere on here that you have to install the drivers that came with it/or the updated drivers from the manufacturers website. I am not using the tiny aerial that came with the stick, I bought a 1090 aerial from eBay.

    It gets a light green arrow at the bottom, and the top arrow moves between red/green about every 5 seconds.

    Does not seem to detect anything.

    Any help appreciated.

    Says this..... (date:time means date and time, it does not say date:time )

    date:time : reader i connected to the receiver, configuring
    date:time : reader i configured, processing messages
    date:time : connection terminated
    date:time : connecting to generic receiver via (exe://mr-dump1090.exe --net --raw)

    then it repeats.

    Search for a town called Worksop, Nottinghamshire, United Kingdom, look for Vicars Walk, that's where I am.

    Any help would be appreciated, I have tried nearly all the workarounds mentioned in the FAQ's, to no avail.
    Last edited by unclechicken; 2016-08-17, 02:58.

  • #2
    Incorrect, you do NOT want manufacturers drivers.

    Need zadig drivers
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers