Announcement

Collapse
No announcement yet.

How to set 2 feeds from dump

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to set 2 feeds from dump

    Can anyone please tell me how to setup a second output from dump1090, so I have one for FR24 and one for VRS ?

    I am 100% new to this and I think I have managed to now start feeding to FR24 with my RTL Dongle on a Win 8.1 PC.

    fr24.jpg

    I would like to be able to feed VRS on this pc as well as feed FR25

    Cheers Kris

  • #2
    If its working for FR24 already, dump1090 will be running and has a server built in that allows multiple connections from different applications

    http://forum.flightradar24.com/threa...ll=1#post45960

    You may have to add --net as an additional option. The active port to tap into is AVR data, on 30002
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

    Comment


    • #3
      Thanks its all a little over my head right now, I am getting there but not used to using dos, ao configuring that way is all new to me.

      Comment


      • #4
        No configuring to be done. Compared to Linux that is.

        The thread I posted has 2 relevant setting screens from VRS that you want to run with how it should be setup.

        The 'settings' page in your screenshot is the settings of Dump1090 (its included with FR24feed)

        You apply the supplied VRS settings, if it doesn't connect/work then next step is to add '--net' to the 'additional arguments' hole on that FR24feed settings page (or enable RAW out option which is instead port 30334 as with his tips)
        Posts not to be taken as official support representation - Just a helpful uploader who tinkers

        Comment


        • #5
          Ween you say add --net as an option do you mean to the .bat file ?

          my VRS looks different to those screen shots.. sorry for being a pain
          Last edited by Skirge; 2016-07-17, 21:24.

          Comment


          • #6
            What bat file? Are you running some sort of automated package. FR24feed on its own, has the .exe only. No parameters there

            In your screenshot. That is the a 'settings' link for the FR24feed webpage configuration. I can see you have pressed it before. Click it, there is a field for additional arguments (with examples) listed
            Posts not to be taken as official support representation - Just a helpful uploader who tinkers

            Comment


            • #7
              Ok so I have used thr wizard in VRS and chose the FR24feed option and opened the setup page added --net and enabled RAW and saved but VRS still will not connect

              Comment


              • #8
                You have to choose one. RAW, or add --net

                Also wont apply until you stop FR24feed, and restart it as it needs to pass on those changes to dump1090.

                Watch the startup screen when you close/launch fr24feed. Any extra options or errors are shown.

                See 'visual log checks'

                http://forum.flightradar24.com/threa...-FAQs-and-Info
                Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                Comment


                • #9
                  Thanks. had to reboot.. its so frustrating, I had it running with RTL1090 & VRS then I had it running with Dump1090 & VSR but since I started feeding FR24 I have hit a brick wall with seeing my feed in VRS.

                  This is what I get when launching FR25
                  bootfr24.jpg

                  Comment


                  • #10
                    Wahooo done it many thanks bus really appreciate all the help... will have to go through all this again when I get my RPi lol

                    Comment

                    Working...
                    X