Announcement

Collapse
No announcement yet.

I am so happy .....ACARS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Charky
    replied
    Nice, that it works a bit now.
    Would be much better if you could avoid this heavy cable network signals.
    Concerning the msgs: some companies are crypting the content others don't, but I think you might find something in the internet or in the documentation.
    good luck, enjoy.
    Karl.

    Leave a comment:


  • delcomp
    replied
    Hi Karl,

    Very happy to say., I turn the volume down on my Hand- Scanner,
    and increased (a little bit)the volume on the Mike., then sat and waited,
    and from 11:00 till 12:30. I had 27 messages received.

    Pity that I can only partly understand them..., How do you guys get the
    full capital understandable text.


    Thank you....again! David
    (the EDLM seens to be working OK)

    Leave a comment:


  • jsearo
    replied
    Allways glad to see happy people ;-)

    greets

    John
    admin of ACARS server jsaero.no-ip.info

    Leave a comment:


  • Lasatalayas
    replied
    Chalky many thanks for your prompt reply.

    Leave a comment:


  • Charky
    replied
    Hi,
    yes 2 different frequencies. And a/c (the same plane) is using on its way from Amsterdam to Rome several frequencies. In the plane it works a bit like a scanner; perhaps during one session using Frankfurt and Munich or Brussels. Mode 2 is sending to any ground station which is available (not busy) on any frequency.
    In this radios there are algo's built-in to select automated the best ground station.

    Leave a comment:


  • Lasatalayas
    replied
    Originally posted by Charky View Post
    Hi,
    and if you have two receivers you can watch ACARS on two channels at the same time (left and right channel).
    Chalky, what do you mean by two channels. Do you mean two different ACARS frequencies?
    i can't find any reference to ACARS transmissions from a single aircraft being split into different channels.
    Or perhaps do you mean downlink and uplink?

    Leave a comment:


  • stm44ae
    replied
    thank you alot

    Leave a comment:


  • Charky
    replied
    131.550 Primär Weltweit
    131.725 Primär Europa
    131.525 Sekundär Europa
    136.900 Europa Sekundär
    136,925 Mhz AM ARINC
    131,825 Mhz AM Lufthansa/Air France
    131.850 Europa neue Frequenz
    136.750 Europa neue Frequenz

    131.475 Air Canada Kanal

    129.125 Zusätzlich in USA und Kanada
    130.025 Sekundär in USA und Kanada
    130.425 Zusätzlich in USA
    130.450 Zusätzlich in USA und Kanada
    131.125 Zusätzlich in USA
    131.450 Zusätzlich in Japan
    136.700 Zusätzlich in USA
    136.750 Zusätzlich in USA
    136.800 Zusätzlich in USA
    136.850 SITA Nordamerika

    Leave a comment:


  • stm44ae
    replied
    but is the 131.725 i can get it work in middle east ?

    Leave a comment:


  • stm44ae
    replied
    thank you charky

    im getting this

    -= Soundcard 'SkySpy Socket Server' =-
    ACARS mode: 1 Aircraft reg: 9V-SFP (76CCD0) [Boeing B747-412F (SCD)]
    Message label: ** [SBS-1 Transmission] Block id: @ Msg no: 0081
    Flight id: SQ7396 [Singapore Cargo]
    Route: [Singapore, Changi International, Singapore-Copenhagen, Kastrup, Denmark via Sharjah, United Arab Emirates via London, Heathrow, United Kingdom]
    Message content:-
    SBS-1 position report N25.73054E53.20648 FL32825 ft./10769 m.
    North: 25.730540 East: 53.206480
    Flight: SIN-CPH Distance: appr. 5383 miles Flight time: appr. 11:57 h

    Leave a comment:


  • stm44ae
    replied
    ok it worked i have no idea how it worked

    Leave a comment:


  • Charky
    replied
    Hi,
    no problem at all. Works fine here.
    Connect Antenna, connect sound output from SBS1er to PC sound input. At the SBS switch radio on and to airband/AM. Put in the frequency (f.ex.131,725). Connect internet to PC. Run Acarsd. Setup home position. Correct the input level at PC if needed.
    Thats all.

    Leave a comment:


  • stm44ae
    replied
    how do i setup acarsd with SBS-er1 ? any help please

    Leave a comment:


  • Charky
    replied
    Hi,
    and if you have two receivers you can watch ACARS on two channels at the same time (left and right channel). I am using acarsd and it works fine for some 100km. And you get pictures of the planes. The only thing I am missing are position reports, There are not a lot.
    But, the reception is not allowed in all countries, because ADS-B is send to everyone the airband might be a protected band.

    ps: if somebody likes to look a bit into the traffic over greece: http://www.sv1lh.net:8080/
    Last edited by Charky; 2010-06-13, 08:38.

    Leave a comment:


  • Evolv5
    replied
    Audio out from the bearcat (e.g. headphone jack) --> double ended male cable ---> audio-in port on your computer.

    Leave a comment:

Working...
X