- Hardware:
Receiver:
RTLSDR RTL2832U with R820T Tuner
Antenna:
Homemade groundplane antenna: http://x264.nl/dump/ads-b-antenna-gr...ane-proper.jpg
Calculator: http://www.csgnetwork.com/antennagpcalc.html
Design: http://ketil.com/la2dna/antenner/PMR...ne_antenna.htm
- Software (Windows):
ADS-B decoder:
A new gui version has been released: http://sdrsharp.com/index.php/downloads
This decoder is still in heavy development, but first tests make it better than rtl1090.
- Virtual Radar Server and Flightradar24 Feedhttp://www.virtualradarserver.co.uk/ version 1.1.2 ( http://www.virtualradarserver.co.uk/...RadarSetup.exe )
FlightRadar24 feed app http://feed.flightradar24.com/
a) run adbs.exe (runs on tcp port 47806)
b) run virtual radar server, connect data source to tcp port 47806
c) run inside virtual radar server via options: rebroadcast server, format BaseStation, port 30003
d) run fr24feed.exe and connect to tcp port 30003
Read this page carefully:
You need to run Zadig on the RTLSDR device and update it's driver.
Sometimes this is needed several times when you connect more than one rtlsdr, or change ports. This differs per system. Read the page.
ppm is part of the configure as used in many programs, to correct the frequency offset of the dongle.
Two examples:
These decoders come with a MCX connector. To use high grade cable you either have to modify the stick and change this connector, or obtain a MCX-> N-type as common on external antennas (but check with your equipment for your own requirements)
Receiver:
RTLSDR RTL2832U with R820T Tuner
Antenna:
Homemade groundplane antenna: http://x264.nl/dump/ads-b-antenna-gr...ane-proper.jpg
Calculator: http://www.csgnetwork.com/antennagpcalc.html
Design: http://ketil.com/la2dna/antenner/PMR...ne_antenna.htm
- Software (Windows):
ADS-B decoder:
A new gui version has been released: http://sdrsharp.com/index.php/downloads
This decoder is still in heavy development, but first tests make it better than rtl1090.
- Virtual Radar Server and Flightradar24 Feedhttp://www.virtualradarserver.co.uk/ version 1.1.2 ( http://www.virtualradarserver.co.uk/...RadarSetup.exe )
FlightRadar24 feed app http://feed.flightradar24.com/
a) run adbs.exe (runs on tcp port 47806)
b) run virtual radar server, connect data source to tcp port 47806
c) run inside virtual radar server via options: rebroadcast server, format BaseStation, port 30003
d) run fr24feed.exe and connect to tcp port 30003
Read this page carefully:
You need to run Zadig on the RTLSDR device and update it's driver.
Sometimes this is needed several times when you connect more than one rtlsdr, or change ports. This differs per system. Read the page.
ppm is part of the configure as used in many programs, to correct the frequency offset of the dongle.
Two examples:
These decoders come with a MCX connector. To use high grade cable you either have to modify the stick and change this connector, or obtain a MCX-> N-type as common on external antennas (but check with your equipment for your own requirements)
Comment