Results 1 to 3 of 3

Thread: RTL 1090 & Planeplotter output differences?

  1. #1
    Passenger
    Join Date
    Jul 2014
    Location
    Dundee, Scotland
    Posts
    23

    RTL 1090 & Planeplotter output differences?

    Running dump1090 for windows and RTL 1090 with planeplotter, there seems to be a little disparity over what Dump and RTL are receiving and what planeplotter is displaying. The example being the image below.


    Untitled.jpg


    Planeplotter displaying 5 aircraft, and RTL1090 receiving 8.

    Is this normal, or am i missing something? This seemed to continue for a good 30 min or so.

  2. #2
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    3,176
    All of the above have their own quality filtering. And hold onto aircraft in the list/onscreen for a set amount of time after signal loss incase it resumes.

    There is no real true method other than disabling all predictions and 'drop after' settings
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  3. #3
    Passenger
    Join Date
    Jul 2014
    Location
    Dundee, Scotland
    Posts
    23
    ok thanks, so it's down to filtering. I had a feeling it may be this or something to do with the quality of the signal being received.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •