is this stuck in a boot loop?
Windows 7 Home Premium 64 Bit
AMD A6-3670APU 2.7ghz
8gb ram
All the updates installed
I've installed the DVB-T drivers, because Win 7 said it was installed when I just plugged it in the USB socket, and I read from somewhere on here that you have to install the drivers that came with it/or the updated drivers from the manufacturers website. I am not using the tiny aerial that came with the stick, I bought a 1090 aerial from eBay.
It gets a light green arrow at the bottom, and the top arrow moves between red/green about every 5 seconds.
Does not seem to detect anything.
Any help appreciated.
Says this..... (date:time means date and time, it does not say date:time )
date:time : reader i connected to the receiver, configuring
date:time : reader i configured, processing messages
date:time : connection terminated
date:time : connecting to generic receiver via (exe://mr-dump1090.exe --net --raw)
then it repeats.
Search for a town called Worksop, Nottinghamshire, United Kingdom, look for Vicars Walk, that's where I am.
Any help would be appreciated, I have tried nearly all the workarounds mentioned in the FAQ's, to no avail.
Windows 7 Home Premium 64 Bit
AMD A6-3670APU 2.7ghz
8gb ram
All the updates installed
I've installed the DVB-T drivers, because Win 7 said it was installed when I just plugged it in the USB socket, and I read from somewhere on here that you have to install the drivers that came with it/or the updated drivers from the manufacturers website. I am not using the tiny aerial that came with the stick, I bought a 1090 aerial from eBay.
It gets a light green arrow at the bottom, and the top arrow moves between red/green about every 5 seconds.
Does not seem to detect anything.
Any help appreciated.
Says this..... (date:time means date and time, it does not say date:time )
date:time : reader i connected to the receiver, configuring
date:time : reader i configured, processing messages
date:time : connection terminated
date:time : connecting to generic receiver via (exe://mr-dump1090.exe --net --raw)
then it repeats.
Search for a town called Worksop, Nottinghamshire, United Kingdom, look for Vicars Walk, that's where I am.
Any help would be appreciated, I have tried nearly all the workarounds mentioned in the FAQ's, to no avail.
Comment