Announcement

Collapse
No announcement yet.

cannot install fr24 on my pi, help!!!!!!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cannot install fr24 on my pi, help!!!!!!!!

    hello,

    Since last morning i can not feed anymore.

    Now i re-install and give the sudo command so as given on the FR24 site: [[ sudo bash -c "$(wget -O - /repo.feed.flightradar24.com/install_fr24_rpi.sh)"]]
    i can not type the hole link because then it will blocked

    But it wil not start, what can i do !

    Please see the picture
    Ashampoo_Snap_2016.04.10_17h31m50s_003_.png

  • #2
    cannot install fr24 on my pi, help!!!!!!!!

    --2016-04-10 12:47:22-- ht tp://rep o.feed.flig htradar24.com/install_fr24_rpi.sh
    Resolving re po.feed.flig htradar24.com (r epo.feed.fli ghtradar24.co m)... 54.231.2.128
    Connecting to repo. feed.flig htrad ar24.co m (repo.f eed.fligh trad ar24.c om)|54.231.2.128|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 921 [text/x-sh]
    Saving to: ‘STDOUT’

    - 100%[=====================>] 921 --.-KB/s in 0s

    2016-04-10 12:47:22 (23.7 MB/s) - written to stdout [921/921]

    gpg: directory `/root/.gnupg' created
    gpg: new configuration file `/root/.gn upg/gpg.conf' created
    gpg: WARNING: options in `/root/.gnupg/gpg.conf' are not yet active during this run
    gpg: keyring `/root/.gnupg/sec ring.gpg' created
    gpg: keyring `/root/.gnupg/pubrin g.gpg' created
    gpg: requesting key 40C430F5 from hkp server pgp.mit.edu
    gpgkeys: key 40C430 F5 can't be retrieved
    gpg: no valid OpenPGP data found.
    gpg: Total number processed: 0

    looks like GPG key expired

    any help on this?

    Comment


    • #3
      You are not the only one, same error when i try to install on my PI.

      sudo bash -c "$(wget -O - repo.feed.flightradar24.com/install_fr24_rpi.sh)"
      --2016-04-10 19:02:35-- repo.feed.flightradar24.com/install_fr24_rpi.sh
      Resolving repo.feed.flightradar24.com (repo.feed.flightradar24.com)... 54.231.80.107
      Connecting to repo.feed.flightradar24.com (repo.feed.flightradar24.com)|54.231.80.107|:80... connected.
      HTTP request sent, awaiting response... 200 OK
      Length: 921 [text/x-sh]
      Saving to: âSTDOUTâ

      - 100%[=====================>] 921 --.-KB/s in 0s

      2016-04-10 19:02:35 (2.31 MB/s) - written to stdout [921/921]

      gpg: requesting key 40C430F5 from hkp server pgp.mit.edu
      gpgkeys: key 40C430F5 can't be retrieved
      gpg: no valid OpenPGP data found.
      gpg: Total number processed: 0

      Waiting for a solution.

      Comment


      • #4
        Likely need to flick support an email to make sure the right team get notified
        Posts not to be taken as official support representation - Just a helpful uploader who tinkers

        Comment


        • #5
          Originally posted by Oblivian View Post
          Likely need to flick support an email to make sure the right team get notified

          Looks like its fixed finally!

          Comment


          • #6
            Yeah for you! Not sure we learned anything here though unless someone explains how it was fixed.
            Last edited by Sam26K; 2016-04-11, 03:36.

            Comment


            • #7
              Seems it's un-fixed again. I'm trying to re-install and getting "key 40C430F5 can't be retrieved" as of 16:00 GMT 26th April.

              Comment


              • #8
                re-fixed - or de-un-fixed - as of 16:50 GMT 26th April

                Comment


                • #9
                  I had the same issue today.. "apt-get update && apt-get upgrade" has fixed the problem

                  Comment


                  • #10
                    I don't believe there is any relationship to the update and the upgrade, fellow Swissman.

                    There are intermittent issues with the GPG/PGP key server at MIT, clearly seen from the log.

                    I too have seen the issue today, and fixed it by copying the trustdb.gpg and pubring.gpg file in the .gnupg directory, where I had already received the key needed to validate the signature on the downloaded files.

                    If the two files are correctly installed in the .gnupg directory, then the install will keep working after receiving the key server error.

                    Best regards from La Côte.

                    Luca (close to LSGP)

                    Comment


                    • #11
                      I've just got my antenna in the mail and trying to set up and having this exact same issue.

                      Comment


                      • #12
                        Originally posted by LSZB11 View Post
                        I had the same issue today.. "apt-get update && apt-get upgrade" has fixed the problem
                        this does work. thanks!

                        Comment

                        Working...
                        X